Can You Swap Easy Grease Caps onto the Trailer Hub and Drum Assembly - 3,500 lb Axles - 10"
Published 11/10/2022
Products Featured in This Question
Question:
I have 4 items in my cart. My question concerns item #AKHD-545-35-K. Will I be able to use my existing grease zerk cap, so that I wont need to remove the wheel to access the grease fitting? Thanks in advance.
asked by: Jeff S
Expert Reply:
The Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased is offered with two different grease caps, part # AKHD-545-35-K for standard or part # AKHD-545-35-EZ-K for easy lube spindles. I suppose you could order the hub that comes with standard grease caps and just reuse your easy lube caps but I recommend the hub that comes with the easy lube grease caps since you would get newer, better components this way.
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: What Bearing Buddy Fits The AKHD-545-35-EZ-K Hub?
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Video: Complete Breakdown of the Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles
- Video: etrailer Easy Grease Trailer Hub and Drums Installation - 2020 K-Z Sportsmen Classic Travel Trailer
- Q&A: Which Hubs Do I Need For 2,200 lb Timbren Axle-Less Trailer Suspension System
- Q&A: How to Grease a Dexter EZ Lube Axle
- Q&A: Replacement Hub and Brake Assemblies for 3,500 Pound Trailer Axle
- Q&A: Looking for Grease Cap With OD Slightly Larger than 1.98 Inches
- Q&A: Replacement Trailer Hubs Using L68149 and L44649 Bearings
- Q&A: 2006 Yacht Club Boat Trailer Hub Replacement Recommendation
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 5-1/2 - Pre-Greased
- Shop: Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 6 on 5-1/2 - Pre-Greased
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased