Can Camco Heated Hoses Be Connected Together

Question

Question:

Hi! Can two 5o ‘ heated water hoses be connect together? What is the typical term for usage/ life of these hoses Thanks ??

asked by: Liz M

0

Expert Reply:

I did contact Camco who confirmed both their Camco RV Heated Drinking Water Hose for Cold Weather 25 foot # CAM22902 and 50 foot # CAM22903 heated water hoses can be connected together. It does require an extension cord with 14 gauge wire to do so. Regarding the life expectancy, they are warrantied for 3 years on the electrical components and 1 year for the hose.

expert reply by: Patrick R

0

Answer 1

According to the manufacturer, you can indeed connect multiple hoses together. However, we do offer the hose in a 25 foot length as part #W01-5325 or a 50 foot length as #W01-5350. Rather than daisy chaining multiple hoses together, I'd recommend…

view full answer...

Answer 2

We do have some products that will work to join to sewer hoses together but not one that uses lugs on both sides. What we do have are the threaded adapter #F02-3102 and a non-threaded, similar version #CAM39203. I have linked videos on both parts for…

view full answer...

Answer 3

Yes, two of the Camco RhinoEXTREME RV Sewer Hose #CAM39861 can be used together when necessary to make a 30-foot total length hose to reach the dump tank fill port. The ends of the hose are a male bayonet and a female bayonet so two are easily…

view full answer...

Answer 4

Yes, you can extend any standard 3-inch RV sewer hose as long as the parts use the same fittings. The Camco RhinoEXTREME RV Sewer Hose #CAM39861 uses the popular bayonet type fittings so multiple hoses can be joined. For reasons of convenience you…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 10

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 11

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Can Camco Heated Hoses Be Connected Together

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching