Bracket Height and Receiver Tube Dimensions of Curt Adjustable Width Trailer Hitch Receiver C13702

Question

Question:

Curt C13702 Adjustable RV Hitch Need to know distance the from the top of the mounting bracket to the cross tube on the 13702. Also the distance from the cross tube to the end of the connector [attachment or stinger] tube.

asked by: John P

0

Expert Reply:

From the top of the mounting brackets to the top of the crosstube on the Curt Adjustable Width Trailer Hitch Receiver for RVs # C13702 measures about 2" and then from the crosstube to the end of the receiver measures about 6". I have attached a dimensional photo for you to check out.

expert reply by: Jon G

0

click to enlarge

Answer 1

When measuring for an adjustable RV trailer hitch, like the Curt #C13702 or #C13701, you will want to measure from the middle of one frame member to the middle of the other frame member. Just to give you an idea I have attached a cutout form the…

view full answer...

Answer 2

Hey Frank, using a magnet is a clever way to get the bolt through the frame. Another way would be a bolt leader like the part #C58390 which you can use to fish the bolt through the frame. A C clip would be another way but it doesn't seem like…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Bracket Height and Receiver Tube Dimensions of Curt Adjustable Width Trailer Hitch Receiver C13702

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching