Recommended Hitch for 2019 Honda Fit- Curt or Draw-Tite?

Question

Question:

Which is the best hitch for my 2019 Honda Fit? What is the difference between the Draw-Tite and the Curt?

asked by: Paul

0

Expert Reply:

When it comes to choosing between the Draw-Tite # 24920 and the Curt # C11406, what sets these two hitches apart for me is that the Draw-Tite has approximately 3" from the center of the hitch pin hole to the bumper where the Curt only has about 1/2". For this reason, I recommend going with the Draw-Tite # 24920; it's recessed far enough that it's out of the way but is still going to allow you plenty of room to use a hitch mounted bike rack.

expert reply by: Erik B

0

Answer 1

I can confirm for you that the Curt Trailer Hitch Receiver #C11202 for your 2010 Nissan Cube does require a stabilizing strap for use with a bike rack item #18050. So you can use this rack and hitch combo on your Nissan. The Thule Doubletrack Pro XT…

view full answer...

Answer 2

Hello Don, Great question, being able to get into the hatch of your Prius would be important to me as well. You will want to go with the Swagman XTC2 TILT #S64671 because it solves the exact concern you mentioned about getting stuck at the trailhead…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 6

Hey Claudia, I checked with Curt just now and confirmed that their hitch part #C64DR does fit all models of the 2026 Toyota Corolla Cross which includes the hybrid models so it would work great for you. We also had customers with similar hybrid…

view full answer...

Answer 7

Hey Doug, I checked with Curt and their hitch part #C58VV is a confirmed for all models of the 2026 Lexus RZ350e including the electric model so it would work great for you. Do you have a bike rack already? What kind of bikes do you have?

view full answer...

Answer 8

Hi Robert, I took a look at the dimensions for the RockyMounts Monorail Solo part #RKY10007 and based off its measurements it'll stick out too far when folded up to fit within the foot of space that you have between your truck and garage door.…

view full answer...

Answer 9

Hey Robert! For a hitch I recommend the Curt Trailer Hitch Receiver #C94WR. This is a Class 3 hitch with a 2" receiver and a bolt-on installation. The Trailer Mate #TMT56FR you looked at is also made by Curt, and isn't quite as robust. This…

view full answer...

Answer 10

Hey Chris! The Hollywood Racks CrossTrack Bike Rack part #HLY98RR already comes with a hitch lock so no need to get one separately! There is also an integrated cable lock to wrap around your bikes as well. The CrossTrack is expandable so that you can…

view full answer...

Recommended Hitch for 2019 Honda Fit- Curt or Draw-Tite?

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching