Mounting Plate Compatible With Buyers Products 8 Ton Combination Pintle Hitch

Question

Question:

Can the Buyers Products 8 Ton Combination Pintle Hitch w/ 50 Millimeter Ball Item # 337BH850MM be used with the CURT 48343 mounting plate Item # C48343?

asked by: David

0

Expert Reply:

I checked with the manufacturer, and the Buyers Products 8 Ton Combination Pintle Hitch with 50 Millimeter Ball # 337BH850MM has mounting holes which are 3-3/8" center to center horizontally and 1-3/4" center to center vertically, which do not match up with the Curt mounting plate you asked about, because it has slightly wider horizontal mounting holes.

What that means is you will need the similar Buyers Products 2" Pintle Hook Mount - 3 Position - 10" shank # 337PM107 which has mounting holes with the same dimensions as the Buyers Products hitch. You will also need the Buyers Products Pintle/Combination Hitch Mounting Kit # 3378520 to mount the hitch and Pin and Clip # PC3 to secure the shank.

I have added links to video reviews for you to take a look at as well.

expert reply by: Kyle S

0

Answer 1

Hello Brian, Yes, on the Buyers Products 10 Ton Combination Hitch with Mounting Kit 2" Ball BH10 Series #33710052 you can swap out the 2" ball with the Replacement 2-5/16" Ball with Nut For Buyers Products Combination Pintle Hitch…

view full answer...

Answer 2

The Buyer's Products plate mount hitch, part #33710052, has the standard 1-3/4 by 3-3/8 inch bolt pattern for mounting to a plate. I've linked our selection of mounting plates for you as well.

view full answer...

Answer 3

Hey Joe. The Buyers Products 15 Ton Combination Pintle Hitch w/ 2-5/16" Ball item #BP38FR does not come with the mounting hardware. You'll need the Buyers Products Pintle/Combination Hitch Mounting Kit item #3378520 for the bolts, washers,…

view full answer...

Answer 4

While drilling holes in any hitch plate like the Buyers #3371809060A will affect its integrity, I believe I have a solution for you. We do have the Hitch Plate #3371809030B which already has the holes for a Pintle #33710057 which also has a…

view full answer...

Answer 5

Hey Ryan, welcome back! The Curt Pintle Hook item #C48210 includes 4 four 1/2" grade 8 bolts that need to be torqued to 90 ft-lbs. This pintle hook has a 20,000 lbs capacity and is compatible with 2-1/2" and 3" lunette rings. What kind…

view full answer...

Answer 6

Hey Jayden, thanks for reaching out! The Firestone W217602709 (part #F2709) is the correct air bag kit for your 2025 GMC Sierra 3500, and I’d definitely recommend sticking with the 7,500-lb bags for your setup. Trucks that carry consistent bed loads,…

view full answer...

Answer 7

Hey Nicole! The Demco Trailer Coupler #DM69FR has 5/8" bolt holes so the Hardware Kit for Demco Adjustable Channel Mount Couplers #DM6166 will fit. Demco calls for grade 5 bolts in the manual, so as long as these are long enough for your…

view full answer...

Answer 8

Hey Joe, welcome back! The B&W Pintle Hook Mounting Plate item #BWPMHD14202 has slightly larger than 1/2" diameter mounting holes. The holes are spaced 1-3/4" apart vertically and 3-3/8" apart horizontally. This mounting plate fits…

view full answer...

Answer 9

No, they do not. We haven't had any issues with the bolt heads and the welds interfering with each other on the Buyers Products Bolt-On 2" Hitch Receiver Tube - 20K item #3371804055. I have attached a picture below so you can see what this…

view full answer...

Answer 10

The only option we have for a pintle hook plate that has D-rings attached for the 1997 Ford L8000 Dump truck is the fabrication plates like part #3371809042 part #3371809043 and part #3371809040. These plates come with the D-rings to be welded on…

view full answer...

Mounting Plate Compatible With Buyers Products 8 Ton Combination Pintle Hitch

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching