Can Pace Edwards SwitchBlade Hard Tonneau Cover Handle Going Through Car Wash

Question

Question:

Can it handle a car wash?

asked by: Christopher G

0

Expert Reply:

The Pace Edwards SwitchBlade Hard Tonneau Cover # 311-SWC0303 can handle going through an automatic car wash. If you are also asking if it will keep the contents of the truck bed dry the answer to that would be mostly yes. This uses an advanced drain system that directly nearly all water to the outside of the bed but it's not totally waterproof so if you have something in the bed you need totally dry you'd need to remove it before going through the car wash.

This cover is one of the most water proof cover options out there so it would be best option.

expert reply by: Jameson C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 3

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 4

Hey Chris, No, there isn't an upgrade kit for your Generation 1 MORryde StepAbove RV Steps to make them a Generation 2. There is a Replacement Leg for MORryde StepAbove RV Steps - 2nd Generation #MR36DR, but because the Generation 1 steps'…

view full answer...

Answer 5

Hey Mark, since folding tonneau covers like the etrailer part #e73DR end up adding height to the top of the bed rails near the front of the bed they are not ideal for towing a fifth wheel trailer as the nose of the trailer is most likely going to…

view full answer...

Answer 6

I attached a picture that shows how the Timbren #TGMRTT35D that you referenced gets assembled. The spacer #TA25722-90P00 you referenced would go between the numbers 2 and 3 and you'd be set. See attached picture. You will need to provide a longer…

view full answer...

Answer 7

I'm happy to help you with that application. For your 2000 GMC Sierra 2500 4WD there are three SumoSpring options for your truck. If you will be doing normal towing and payloads then I recommend the SumoSprings Solo Custom Helper Springs…

view full answer...

Answer 8

Timbrens would be the way to go since you are hauling quite a bit of weight. So for your 2008 Chevy Silverado 2500 you'd want the part #TGMRCK25S which can give you up to an additional 6,000 lb of suspension support. You should note that this kit…

view full answer...

Answer 9

If your 2002 Chevy Silverado 1500 is leaning to the left, I assume you have come to us because you are carrying a heavy load and this is when it is occurring. If so, we have exactly what you need to fix the issue; if it is happening at all times you…

view full answer...

Answer 10

The difference between the 2007 Chevy Silverado 2500 and the 3500 series trucks is the weight capacity. The 3500 is going to have a higher weight capacity than the 2500. I spoke with the engineer at Timbren and he told me that the TImbren part…

view full answer...

Answer 11

Where you'll attach the pivot arms on the B&W Patriot #BWRVK3255 just depends on how much clearance you need from the cab of the truck, but in most cases you'll be just fine using the closest setting to the cab. You'll want to make…

view full answer...

Answer 12

The kit you referenced is actually designed for heavier duty versions of the Silverado like the 2500 and the 3500. I wish SumoSprings offered lift spacers for their kits but they do not currently. Best solution will be to use the #TGMRCK25S which…

view full answer...

Can Pace Edwards SwitchBlade Hard Tonneau Cover Handle Going Through Car Wash

Product Page this Question was Asked From

Continue Researching