Recommended Trailer Hitch for a 2020 BMW X5

Question

Question:

Need a trailer hitch for my 2020 BMW X5. What fits.

asked by: Jerry

0

Expert Reply:

The trailer hitch that you'll need to use for your 2020 BMW X5 is the Draw-Tite # 76288. It is currently (as of November 2019) the only trailer hitch fit available for your X5 (excluding the M performance model) but it is still an excellent option because it has the larger 2" receiver and features a hidden cross tube. This combination means that you can carry a wide variety of accessories while maintaining an OEM look since only the 2" receiver is visible once installed.

If you let me know what you plan on using the trailer hitch for I can make additional recommendations. The written instructions have been linked for you to check out.

expert reply by: Jon G

0

Steve C.

2/28/2020

I have a 2020 x5 with m sport trim. Do you guys have a hit h that will fit? BMW has no hitch for the m sport trim. X5 is a 4.0 if that matters. THX

Chris R.

2/29/2020

At this time there isn't a hitch available that will fit your 2020 BMW X5 that has the M Sport Package. I'm not sure what your plans were for the hitch but if it was to transport bikes or other accessories (and not towing a trailer) then we do have some alternate options that will work well, such as a trunk bike rack or a roof rack system. Let me know if this is the case and I'd be happy to make some specific recommendations.

Helpful Links

roof-2020_BMW_X5.htm

trunkmount-2020_BMW_X5.htm

Reva J.

7/6/2020

@ChrisR I have a 2020 BMW X5 with the sport package, the off road package and the tow package. BMW says I should not use a WD hitch but the RV place sold me one. Should I take it off and get a non WD hitch ball? I am towing a 22 ft Bambi Airstream which weighs 4500 pounds. I'd also like a rec on tire pressure alarms if you guys sell those. Thanks in advance for your help.

Chris R.

7/10/2020

@RevaJ If BMW advised against a WD system I would follow their instruction. This restriction may also be listed in the vehicle's owner's manual. WD systems put a lot of stress on the hitch and vehicle, so not all setups are rated appropriately. For a tire pressure monitoring system the TireMinder # TPMS-APP-4 will work really well.

Helpful Links

dept-pg-tpms_sensor.aspx

See All (5) Replies to Steve C. ∨

Mark

3/7/2020

Just to clarify , I have 2015 X5 with M Sport package and Curt 2 hitch installed , when you search for this vehicle it also says excluding M performance models , but it does fit X5 with M Sport package.Is this also applicable for 2019+ X5 ?

Chris R.

3/9/2020

The Curt # 13077 is a fit for both the M Sport Package and Non-M Sport BMW X5 up through the 2018 model year. If you go through the vehicle fit guide for your 2015 model the hitch would actually show up for both vehicle configurations (it's just how we have to list it because of how other brand hitches fit). As of now though (March 2020) there isn't a hitch available for the 2019+ BMW X5 with the M Sport package.

Jon G.

8/26/2020

UPDATE: We actually have some options for the M Sport now! Check out the attached link to see various hitch options for a 2020 X5.

Helpful Links

hitch-2020_bmw_x5.htm

Answer 1

We do have a hitch for your 2021 BMW X5 M. However, the correct hitch depends on what you mean by M. If you have an actual M performance model, which would be the M or the M Competition, then the correct hitch is the #SH64MR. If you plan on using it…

view full answer...

Answer 2

On a friction-type trailer sway control mechanism like the Reese #83660 and the similar Curt item #17200 the tension control bolt (noted in the linked photo) can be re-set to a "neutral" position most easily if you remove the entire arm…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Recommended Trailer Hitch for a 2020 BMW X5

Continue Researching