Speed Rating Of Kenda Bias Trailer Tire AM30130

Question

Question:

What is the speed rating of these tires?

asked by: Bobby D

0

Expert Reply:

The speed rating for the Kenda 5.70-8 Bias Trailer Tire with 8" Galvanized Wheel - 4 on 4 - Load Range C part # AM30130 is 65 mph.

expert reply by: Heather A

0

Answer 1

Hey Larry, For that tire size and trailer capacity I recommend the Kenda 5.70-8 Bias Trailer Tire with 8" Galvanized Wheel - 4 on 4 - Load Range B #AM30090 or #AM30080 for a white wheel. These have a 715lb capacity when aired up to 50psi.

view full answer...

Answer 2

We do have the wheel and tire combination you are looking for, but we do not carry foam filled tires. The available options are Kenda 5.70-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range B #AM30080 Load Range C #AM30120, or Load…

view full answer...

Answer 3

We actually have two wheel and tire combo that match the size and galvanized wheel you have referenced. The Kenda 5.70-8 Bias Trailer Tire with 8 Inch Galvanized Wheel - 4 on 4 - Load Range B, #AM30090, and the Kenda 5.70-8 Bias Trailer Tire with…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 8

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 9

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 10

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 11

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6 inch whereas the 225/75-15 fits widths that are 5 inch to 6-1/2 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Speed Rating Of Kenda Bias Trailer Tire AM30130

Product Page this Question was Asked From

Continue Researching