Comparing Hole Spacing On Weight Distribution Shanks from Curt C17122 and Equalizer EQ90-02-4600
Updated 10/29/2019 | Published 10/28/2019
Products Featured in This Question
Question:
Hello, I need an extended shank for my towing application. Generally speaking, is the hole spacing on the shank where the head bolts through the same between different manufactures or not? Is it the same between these two shanks Ive listed or not? Thanks
asked by: Jeff
Expert Reply:
The hole spacing on weight distribution shanks is going to be a standard 1-1/4" apart center on center to allow compatibility between manufacturers. I've attached pictures of the Equal-i-zer # EQ90-02-4600 (first picture) and the Curt # C17122 (2nd) to show you the differences between the two outside of the hole spacing for the ball mount.
I've also linked our entire selection of weight distribution shanks for 2" hitch receivers for you to look at. If you can let me know what specific length you're looking for, I can help find one that suits your application.
Product Page this Question was Asked From
Equal-i-zer Weight Dist Shank - 18" Long - 8" Rise, 4" Drop - 600 to 1,400 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1500 lbs TW
- Fits 2 Inch Hitch
- Equal-i-zer
- Square - 4 Inch Drop
- Square - 8 Inch Rise
- Equal-i-zer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 233514
- Search Results: suburban anode rod
- Shop: Equal-i-zer Weight Dist Shank - 18" Long - 8" Rise, 4" Drop - 600 to 1,400 lbs TW
- Shop: Camco RV Water Heater Anode Rod - Aluminum - 3/4" Diameter x 9-1/2" Long
- Shop: Camco Water Heater Element - Screw-In - 1000 Watts - 120 Volts
- Search Results: curt 17122
- Shop: Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 10" Rise/6" Drop
- Shop: BTBRV Magnetic Hitch Receiver Reducer Set - 3" to 2-1/2" & 2-1/2" to 2"
- Q&A: Dimensions Of Equal-i-zer Weight Distribution Shanks For 2-1/2 Inch Receivers
- Shop: Weight Distribution Shank for BulletProof Hitches Adjustable Ball Mount
- Shop: Blue Ox SwayPro Weight Distribution Shank for 2-1/2" Hitch - 9" Long - 9 Hole Adjustment
- Q&A: Determining The Correct Drop Shank For An Equal-i-zer Weight Distribution Hitch
- Q&A: What Ride Height Difference Is Acceptable On A Ram 2500 When Using A Weight Distribution Hitch
- Q&A: How to Choose the Correct Shank for an Equal-i-zer Weight Distribution System
- Search Results: sway control for pole tongue
- Q&A: Recommended Weight Distribution Hitch System For a 6,000LB Sailboat Trailer With a Straight Tongue
- Q&A: What Size Socket is Needed For 2-5/16 Inch Hitch Ball
- Video: The Low-Down on the Pole-Tongue Adapter for Equal-i-zer Weight Distribution Systems
- Video: Detailed Breakdown of the Thin Walled Socket for Equal-i-zer Hitches
- Video: 2-5/16" Hitch Ball for Equal-i-zer Weight Distribution Systems Review
- Video: All About the 1-7/8" 12pt Thin Walled Socket
- Video: The Low-Down on the 2-5/16" Hitch Ball for Equal-i-zer Weight Distribution Systems
- Video: Checking Out the 1-7/8" 12pt Thin Walled Socket
- Shop: Trailer Hitch
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
on Accessories and Parts
