How To Determine Fit of the Phoenix USA Center Cap For Motorhome Rear Wheel

Published 10/23/2019

Products Featured in This Question

Replacement Phoenix USA Rear Wheel Center Cap - 6-1/2" or 8-1/4" Hub Diameter

(215)

$55.62

Phoenix USA Rear Wheel Center Cap - 6-1/2" Hub Diameter - Center Hole Mount - Right Thread

(215)

$78.97

Phoenix USA Rear Wheel Center Cap - 8-1/4" Hub Diameter - Center Hole Mount

(215)

$99.41

Question:

Not sure what the axle diameter is. I measured the remaining hub cover on the motorhome and it measures about 8 1/4inch in diameter and about 6 1/2inch deep, will this cover work? It is for a rear wheel.

asked by: Steve C

Expert Reply:

The Phoenix USA Wheel Center Cap part # PXPH1843 is a replacement for the Phoenix USA Wheel Center Cap part # PXQ1009 which is for a 6-1/2" diameter axle or the Phoenix USA Wheel Center Cap part # PXQ1020 which is for a 8-1/4" diameter axle. Therefore, if you have either of these kit then it will work for you but this would not be able to be installed on its own without the bracket and center bolt.

If you don't have the bracket and center bolt then you will need to install the kit and the correct one can be confirmed by verifying the bolt pattern (8 on 275mm) and axle diameter (6-1/2" or 8-1/4").

expert reply by: Conner L