Safestep Vinyl Barrier Dimensions

Question

Question:

Could Safestep Vinyl Barrier Install on Brophy Scissor Step #ASO4? Also, what are the two grommets for?

asked by: Carol U

1

Helpful Expert Reply:

The TorkLift SafeStep Vinyl Barriers are 18-1/2" long and 10-1/2" tall, so they're going to be just a tad too big for the Brophy Scissor Steps # AS04 which are 17" wide. You could potentially trim off some of the excess vinyl to allow you to close up the steps without interference or you could get wider steps like the Brophy Scissor Steps # AS24 which are 24" wide and provide more than enough room to use the SafeStep Barriers.

expert reply by: Erik B

1

click to enlarge

Answer 1

You will want to choose the correct system based off of the loaded tongue weight of your trailer; this should typically be between 10% and 15% of the loaded weight of the trailer. I recommend using the Equal-i-zer Weight Distribution w/ 4-Point Sway…

view full answer...

Answer 2

The TorkLift GlowStep Revolution Uprising Steps part #TLA9005 will work great to replace the fold down steps (Lippert SolidStep RV Steps/MORryde StepAbove RV Steps) on your 2022 Grand Design Reflection 337RLS. I checked with TorkLift to confirm this…

view full answer...

Answer 3

Hey Kari, thanks for reaching out! The TorkLift GlowStep Revolution Uprising Steps w/ Booster Step - 4 Steps #TLA9005 are the correct steps according to the TorkLift website. The bracket will sit in about 5" and from the ground to the steps will…

view full answer...

Answer 4

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 7

Hey Patti, thanks for reaching out. The Swagman E-Spec Pro Bike Rack #S45SR is a solid option for this. It can hold two bikes weighing up to 70 lbs apiece on a 5th wheel, and it does not have a minimum tongue weight capacity limitation like the…

view full answer...

Answer 8

Hey Laura! Yes, the Van Windows Direct #VW83FR and #VW45FR come with the parts needed for installation. However, each one does list some additional materials and tools to complete the installation. I went ahead and attached pictures of these below. I…

view full answer...

Answer 9

Hey Heidi. To use a Curt Echo Wireless Brake Controller item #C51180 on a tow vehicle with only a 4-way connector, you'll need the 7-Way RV Upgrade Kit for Trailer Brake Controller Installation item #ETBC7L. The Curt Echo item #C51180 requires a…

view full answer...

Answer 10

Hello Richard, thanks for reaching out. The Replacement Dome for Dometic FanTastic RV Roof Vents #FVK1020-19 does looks very similar to the vent lid in your picture, but we'll need to look more closely at how your current lid attaches. The…

view full answer...

Answer 11

Hi John! For the Dexter 9-3/4" Hub-and-Rotor Assembly - 5 on 4-1/2 - Zinc - 4,200 lbs #DX82UR, you will need the following parts: Replacement Caliper for Dexter 10" Brakes - Driver's Side #K71-773-01 Replacement Caliper for Dexter…

view full answer...

Safestep Vinyl Barrier Dimensions

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching