Will 3,500 lb Hub/Drums and Brake Assemblies Fit on 3,500 lb Dexter Axle
Published 09/27/2019
Products Featured in This Question
Question:
Which u bolts are used on this axle. Can you provide the part number from your store?
asked by: BRYAN W
0
Expert Reply:
The Dexter Axle part # 7359765 that you referenced has brake flanges attached to the spindles so your current assemblies will bolt right up and since it's the same 3,500 lb capacity you need the hubs you have will easily fit on it as well. So with this axle you will be able to install all of your current hub/drum/brake assemblies and the brakes will be functional.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 3500 lbs
- Spindles Only
- 80 Inch Spring Center
- 95 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Shop: Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 3,500 lbs
- Q&A: Recommended Replacement Straight Axle for a Carry-On Trailer
- Video: Complete Breakdown of the Dexter Trailer Axle Beam with E-Z Lube Spindles
- Shop: CE Smith U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts - Zinc
- Shop: 2-3/8" Round Trailer U-Bolts (Qty 2)
- Video: The Low-Down on the Dexter Trailer Axle Beam with E-Z Lube Spindles
- Shop: Square Drop Leg Stabilizer Jack - 18" Travel - 2,000 lbs - Qty 1
- Shop: Demco Trailer Coupler - Adjustable Channel Mount - eZ-Latch - Black - 2" Ball - 10,000 lbs
- Shop: Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs
- Shop: Dexter Trailer Axle Beam with E-Z Lube Spindles - 86-1/2" Long - 5,200 lbs
- Q&A: Looking For Replacement Bearing For Square Tube Top Wind Trailer Jack
- Q&A: How To Choose Correct 3,500 Lb Axle for Slipper Spring Setup
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Anti-Rattle Device For Weight Distribution System
- Q&A: Is there a Brake Mounting Flange for a Square 3500 Pound Trailer Axle
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: How to Measure a Trailer Axle
- Q&A: Should the Grease Bolts Be Tight on the Dexter DX7.5 Drop-N-Go Brake Actuator?
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Replacement Docking Station Door for a B&B RV Water Center
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Install a Weight Distribution Hitch (With Pictures & Video)
Bryan T.
9/27/2019
Which u bolts are used on this axle. Can you provide the part number from your store?