Parts Needed for Equal-I-zer Weight Distribution to Tow 2016 Airstream with 4 inches of Drop
Updated 09/02/2019 | Published 08/30/2019
Products Featured in This Question
Question:
I have a 2019 Tacoma that has a slight lift that I use a 4inch drop hitch to level my 2016 Airstream 16 Sport. The 4inch drop puts the top of the ball just below the inside top of the receiver. Will this hitch work or is there another that allows for the 4inch drop? Thanks.
asked by: TC
Expert Reply:
While I have a great solution for you the Equal-i-zer kit part # EQ37060ET that you referenced comes with a shank that allows a drop of up to 3 inches so it would not be ideal for you.
Since you need one more inch of drop beyond that your best option is to get the version of this system that doesn't come with a shank so that you can order one that has the amount of drop you need. So for that you'd want the part # EQ37061ET for the system without the shank and then for the shank you'd need the part # EQ90-02-4800 and you'd be set.
Product Page this Question was Asked From
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 6,000 lbs GTW, 600 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Trunnion Bar
- Fits 3 Inch Frame
- Fits 4 Inch Frame
- Fits 5 Inch Frame
- Fits 6 Inch Frame
- Includes Shank
- Top-Mount
- Fits 2 Inch Hitch
- Allows Backing Up
- 400 lbs
- 500 lbs
- Equal-i-zer
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Vehicle Snow Plows
- Shop: Front Mount Hitch
- Search Results: snow plow
- Q&A: Front Hitch that Fits 2020 GMC Sierra 1500 AT4
- Shop: Detail K2 Elite Snowplow for 2" Hitches - 82" Wide x 19" Tall
- Shop: SnowBear Elite Snowplow for 2" Hitches - 88" Wide x 26" Tall
- Shop: Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- Shop: SnowBear Snowplow for 2" Hitches - 88" Wide x 26" Tall
- Search Results: backup camera
- Search Results: trailer wheel chocks
- Search Results: fastway wheel chocks
- Search Results: 17120
- Search Results: curt 17499
- Shop: Catalytic Converters
- Search Results: coupler locks
- Q&A: How to Measure to Determine if Fastway ONEstep Wheel Chocks will Fit a Dual-Axle Trailer
- Q&A: Measuring Fit of Fastway ONEstep Wheel Chocks
- Q&A: Correct Curt Weight Distribution System for 5K to 7K Trailer
- Q&A: Is a Weight Distribution Hitch Needed to Tow a 3500 Pound Trailer?
- Q&A: Can Shank of Curt Weight Distribution C17499 be Replaced with One with More Drop
- Q&A: Can a Weight Distribution System Be Installed on a Royal Crown V-Nose Trailer
- Shop: Curt Trunnion Style Weight Distribution System with Shank - 10,000 lbs GTW, 1,000 lbs TW
- Shop: Curt Weight Distribution Shank - 10" Long - 5-3/4" or 6-1/8" Drop - 1,500 lbs TW
- Shop: Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 8" Rise, 4" Drop
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure for Trailer Hitch Drop
- Shop: Suspension Enhancement
on Weight Distribution Hitch
