Procedures and Equipment for Flat Towing 2016 Fiat 500 Manual Transmission
Published 08/09/2019 >
Products Featured in This Question
Question:
my question is what do u have to do with the steering wheel. does it have to be in the on position or do I have to disconnect the battery or pull fuses?
asked by: Barry T
Expert Reply:
When flat towing your 2016 Fiat 500 Easy, you'd leave the steering wheel unlocked to avoid tire scrub. I've checked the owner's manual, as well as the industry resources at my disposal and have found that it's not necessary to pull any fuses or disconnect the battery.
To flat tow a vehicle, you'll need base plates, a tow bar, safety cables, a wiring solution so the vehicle taillights work along with those of the tow vehicle, a supplemental braking system and possibly a high/lo adapter.
For base plates, I'd recommend the Roadmaster # 522013-1A. Roadmaster's base plates set the industry standard for a secure and reliable fit.
The Roadmaster Falcon 2 towbar, part # RM-525 would be an excellent choice, the self centering arms make for a smooth ride and an easy hook up and disconnect. For safety cables, the coiled design of the # RM-643 will keep the cables from dragging and becoming prematurely worn.
When it comes to wiring the vehicle for flat towing, a diode kit like # RM-15267 is quick and easy to use once its been installed. The connectors for the vehicle and the tow vehicle are included, along with the umbilical used to connect both vehicles.
For supplemental braking, Roadmaster recommends the Invisibrake, part # RM-8700, along with a stop light switch kit # RM-751455 and a 12-volt outlet kit, # RM-9332. Just as the name implies, the Invisibrake works seamlessly after it's been installed. Nothing to set up or worry about.
When the base plates are installed, they'll sit about 16-1/2 inches above the ground. For the sake of safety, the tow bar needs to be plus or minus 3 inches from level. So, if the receiver height on the tow vehicle is higher above the ground than 19-1/2 inches or lower than 13-1/2 inches, you'll want to use a hi/lo adapter to get the tow bar closer to level.
I'll link you to some help articles about flat towing, as well as to a page showing our hi/lo adapter offerings.
Product Page this Question was Asked From
Roadmaster Crossbar-Style Base Plate Kit - Removable Arms
- Tow Bar Base Plate
- Removable Draw Bars
- Twist Lock Attachment
- Partially Hidden
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Recommended E-Bike Bike Rack for a 1-1/4" Hitch on a Flat Towed Vehicle
- Q&A: Replacement Control Unit For a 1510000172 Kwikee Step Control Unit
- Q&A: Difference Between the Roadmaster Sterling All Terrain RM-576 and Sterling RM-555 Tow Bar
- Article: Roadmaster Tow Bar Feature Descriptions
- Q&A: Flat Towing Set Up for 2013 Fiat 500
- Q&A: Which is Better Roadmaster or Blue Ox Tow Bar
- Q&A: Recommended Base Plates to Use with Blue Ox Aventa Tow Bar on 2017 Fiat 500
- Q&A: Will the Curt Trailer Hitch Interfere With a Spare Tire On a 2007 Lexus RX350
- Article: Flat Towing Package for 2016-2017 Ram 1500
- Article: The Definitive, Step-by-Step Flat Towing Setup Guide
- Article: Roadmaster Vehicle Specific Base Plates
- Article: How to Choose a High-Low Adapter
- Article: How Level Should a Tow Bar Be When Flat Towing
- Article: How to Hitch and Lock a Trailer




