5 Lug Hub Replacement Recommendation for Dexter 4 Lug Hub
Updated 08/07/2019 | Published 08/06/2019
Products Featured in This Question
Question:
Do you have a replacement hub that will fit with a regular 5 bolt pattern and what is the cost of it. Thanks Dexstar 4 bolt rim hub
asked by: Don
0
Expert Reply:
If you have a Dexter 4 lug hub currently that would mean your trailer has a BTR sized spindle so to replace it with a 5 lug hub would require the part # 8-258-5UC1 and you'd be set. This will fit your spindle in place of the 4 lug hub you have now and will work great.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Dexstar Steel Spoke Trailer Wheel - 15" x 6" Rim - 6 on 5-1/2 - White Powder Coat
- Trailer Tires and Wheels
- Wheel Only
- 15 Inch
- 6 on 5-1/2 Inch
- Steel Wheels - Powder Coat
- Dexstar
more information >
Continue Researching
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2
- Q&A: Dexstar Vintage Steel Wheel # AM20208 or Hub Upgrade
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Is The Dometic Replacement Bellows DOM58FR A Genuine Dometic Part?
- Q&A: Recommended Keyed Alike Trailer Hitch Receiver Locks
- Q&A: How Wide of a Rim is Recommended for the Tire Size ST225/75R15
- Q&A: Replacement For 125255UC Grease Seal
- Q&A: Should Leaf of Trailer Leaf Spring be Removed to Lower Capacity
- Q&A: Can I Use 5/8" Pins Instead Of Bolts For A Channel Mount Coupler?
- Article: Trailer Tire Sizing
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Trailer Lighting Requirements