T-Slot Kit for Malone DownLoader Kayak Carrier for Thule TracRac TracONE Ladder Rack

Question

Question:

Have a tracrac trac one and malone downloader kayak carrier. What can I use to attach the malone carrier to the tracks in the trac one if I done have the kit for that

asked by: JOSEPH R

0

Expert Reply:

The Thule TracRac TracONE Truck Bed Ladder Rack # TH27000XT has bars which are 4" wide so in order to mount the Malone DownLoader Kayak Carrier with Tie-Downs # MPG114MD you will need the Truck Rack T-Slot Fit Kit for Malone Kayak Carriers # MPG8287.

The TracONE bars are too wide for the DownLoader to mount to the brackets in any other manner.

expert reply by: Kyle S

0

Answer 1

Yes, the Cantilever Extension for Thule Ladder Racks #TH24001XT will work great for hauling longer kayaks with your 2018 Ford F-250 Super Duty. This works great with the TracRac G2, TracONE, and T-Rac Pro2 ladder racks. If you let me know what bed…

view full answer...

Answer 2

If your J-style kayak carrier clamps are too small to fit around the Thule Xsporter Pro Ladder Rack then you will likely need a new kayak carrier, unless there is an option to use T-bolts to install the kayak carrier into the Xsporter crossbar…

view full answer...

Answer 3

Yes, the Replacement Top Infill for Yakima HD Crossbars #Y01166 is the correct replacement top strip for your Yakima HD crossbars.

view full answer...

Answer 4

Hey James, for the Yakima HD Overhaul rack the replacement bottom infill is the part #Y01166-LC and the top is part #Y01166. The bottom and top channels of the bars are the exact same dimensions and profile so they are interchangeable.

view full answer...

Answer 5

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Answer 6

Since the Yakima CoreBar #Y00421 does not have a t-slot to accept the standard load stops like #753-3761, and due to its shape the LoadStop Brackets for Yakima Round Crossbars #Y05000 won't work either, leaving you with no compatible option. In…

view full answer...

Answer 7

There is a way to reuse your existing keys but the Yakima Same Key System (SKS) Lock Cores #Y07202 cannot be ordered to match your keys. What you would need to do is order single lock cores that match your keys. For example, if your key had a number…

view full answer...

Answer 8

For a 2024 Kia Carnival with raised rails I recommend using the Yakima JetStream Crossbars #Y00426 along with the TimberLine Towers for Yakima Crossbars #Y33TR. These feet have quick-install straps to easily mount on your raised rails and can easily…

view full answer...

Answer 9

The weight capacity of the Yakima CoreBar Crossbars like part #Y00421 is 220 lbs which is for loads evenly distributed across both bars. If you need a higher weight capacity, Yakima does off the HD Crossbars like part #Y01157 which have a 500 lb…

view full answer...

Answer 10

I contacted Malone and the Malone XtraLight Trailer (MPG525) is not compatible with Crossbars for Malone MicroSport Trailers - 78" Long part #MPG4001. The only trailer that can use the longer cross bars is the Malone Microsport trailers that…

view full answer...

Answer 11

I recommend picking up the Aero Style Crossbar T-Slot Fit Kit #MPG8287 which comes with bolts, nuts, and washers that will fit in the Yakima HD Bar T-Slots like the 78" part #Y01159. If you're trying to find specific dimensions for your own…

view full answer...

Answer 12

The best way to install the Malone Downloader part #MPG114MD on the Thule Aeroblade crossbars will be with the T-slot adapter part #MPG8287. This will give you the super solid connection point you are looking for.

view full answer...