Comparing the 50 Inch and 58 Inch Long Malone AirFlow2 Roof Racks for a 2018 Jeep Cherokee

Question

Question:

The 58 inch Malone Crossbar Kit part # MPG216 is recommended for 2018 Jeep Cherokees but your video s a demonstrates a 50 inch bar - why are the 58 inch bars recommended?

asked by: Connie

0

Expert Reply:

The Malone AirFlow2 Roof Rack part # MPG215 and the Malone AirFlow2 Roof Rack part # MPG216 will both fit your 2018 Jeep Cherokee if you have the silver colored side rails. The only difference between them is length, 50" long vs 58" long. I would not say one is recommended over the other because the best one for you really just comes down to what you will be using them for.

If it is just for a cargo box or basket then you will be fine with the 50" long crossbars part # MPG215 but if you want to carry multiple kayaks or a cargo box and a bike rack then you would want to go with the 58" long crossbar part # MPG216. I personally prefer the longer options in case you change your mind on what you need to be able to carry in the future.

expert reply by: Conner L

0

Answer 1

The Malone #MPG216 AirFlow 2 roof rack is what I'd refer to as a budget-priced product. The quality is pretty decent, but they don't quite reach the Yakima/Thule pinnacle. If the roof rack will see daily or weekly use, it wouldn't be what…

view full answer...

Answer 2

Hi Leon, Factory roof racks typically have a low weight capacity and won't have enough overhang for a kayak carrier with lift assist to be compatible so I definitely recommend checking the capacity and overhang to see if you can use it. The Thule…

view full answer...

Answer 3

Yes, that is correct the Thule Hullavator Pro item #TH898 does indeed work with the 58 "Malone AirFlow2 Roof Rack item #MPG216. These mount to the raised rails on the 2016 Chevy Equinox and will give you plenty of room to use the lift assist…

view full answer...

Answer 4

Yes, the Thule Hullavator Pro Kayak Carrier part #TH898 will work with the Malone AirFlow2 Roof Rack either using the integrated channels or the wrap-around style clamps. However, the Hullavator requires that the crossbars extend at least 4"…

view full answer...

Answer 5

Yes, they will. To attach the 53" Thule WingBar Evo Crossbars item #TH711420 to the factory rails of your 2022 Subaru Forester Wilderness you will need the Evo Raised Rail Feet for Thule Crossbars item #TH710401. They're only 3" wider…

view full answer...

Answer 6

There are multiple crossbar size options available for a 2022 Subaru Forester, I recommend the Rhino-Rack Vortex Aero Crossbar System part #RRVA137B-2 for 54" or part #RRVA126B-2 for 49" and part #RRSX100. The best size for you comes down…

view full answer...

Answer 7

In order to use the Thule Hullavator Pro Kayak Carrier part #TH898 on a 2019 Subaru Forester it is recommended to use a 47" or 119cm long crossbar. For this, I recommend the Thule WingBar Evo Crossbar System part #TH711220 and part #TH710401 as…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 12

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Comparing the 50 Inch and 58 Inch Long Malone AirFlow2 Roof Racks for a 2018 Jeep Cherokee

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching