Determining Correct Dexter Equalizer Kit for 2004 Excel Limited Edition Trailer
Updated 06/19/2019 | Published 06/18/2019
Question:
I have a 2004 Excel Limited edition model # 35rke it has 8,000 lb. dexter axles. with 24 inch springs . which suspension kit do I need ?
asked by: Donald T
Expert Reply:
The correct Dexter Suspension Kit for your 2004 Excel Limited Edition 35RKE will depend on your axle spacing along with the dimensions of your current equalizers. If your Excel has 35 inches of clearance between the axles and the current equalizers measure close to 7-3/4 inches long (from center hole to center hole) and 2-7/8 inches tall then the Heavy-Duty Suspension Kit # K71-449-00 will work perfectly.
Please let me know if your dimensions differ and I will be happy to recommend an alternative. Unfortunately trailer manufacturers don't make information like this available so I'm unable to determine the correct fit without these measurements.
I have included a link that will take you to our available selection of Dexter suspension kits that you can also look through.
Product Page this Question was Asked From
Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs
- Trailer Suspension Parts
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Tandem Axle
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 473336
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Shop: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front/Rear, 2-1/2" Center
- Shop: Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Shop: Timken Grease and Oil Seal - Double Lip - I.D. 1.719" / O.D. 2.565" - 473336
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Shop: Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: Do the Bolts of the Dexter Heavy-Duty Tandem-Axle Trailer Suspension Kit Have Splines
- Q&A: Will Upgrading Trailer Suspension Stop Tires from Blowing Out
- Q&A: Which Equalizer Upgrade Kit For 33 Inch Axle Spread Tandem Axle Trailer
- Q&A: Does the Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers Come with Bolts for the Hangers
- Q&A: Dexter Heavy-Duty Tandem-Axle Trailer Suspension Kit Compatibility With Leaf Springs
- Q&A: Will the Dexter E-Z Flex Suspension Kit Work for Boat Trailer in Saltwater
- Q&A: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers