Can Spring Bars of Equal-i-zer Weight Distribution System be Changed to Change Rating
Question:
I have a 12k/1200 Ib. Equalizer. I need a 1000 Ib. one for my tounge weight. Are the spring bars interchangeable if I bought 1000 pound replacement bars?
asked by: Shane J
0
Expert Reply:
Yes, you can just replace the spring bars and head of your current system to change the weight rating. All you would need is the part # EQ90-01-1099 for a set of bars and # EQ90-02-1000 for the head that are rated lower at 1,000 lbs tongue weight.
expert reply by: Jameson C
0
Products Referenced in This Question
Replacement Spring Bars for Equal-i-zer Weight Distribution Systems - Qty 2 - 1,000 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Spring Bars
- 1000 lbs TW
- Square Bar
- Equal-i-zer
more information >
Replacement Head for Equal-i-zer Weight Distribution Systems - 1,000 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Head
- Square Bar
- Equal-i-zer
more information >
Product Page this Question was Asked From
Equal-i-zer Weight Dist Shank - 12" Long - 7" Rise, 3" Drop - 600 to 1,400 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1400 lbs TW
- 14000 lbs GTW
- Fits 2 Inch Hitch
- Square - 3 In Drop
- Square - 7 In Rise
- Equal-i-zer
more information >
Similar Expert Q&A Pages
- Equal-I-zer Weight Distribution Shank that has More than 3 Inches of Drop
- Replacement Shank and Head for Equal-i-zer Weight Distribution System
- What Does Equalizer Shank part # EQ90-02-4100 Weigh
- Longer Weight Distribution Shank for Helping with Tailgate Clearance
- Will Blue Ox SwayPro Shank Work With Equal-i-zer Weight Distribution System
- Equipping 2019 Kia Sedona LX For Towing 3200 lb Pop-Up Camper
- Weight Distribution System that is Made in the USA
- How to Determine What Rise/Drop That is Needed for Weight Distribution System
- Will Curt Weight Distribution Shank Work in Place of Equal-i-zer Shank for 2 Inch Receiver
- Upgrading the Equal-i-zer Weight Distribution System
- How Much Does the Equal-i-zer Weight Distribution System # EQ37100ET Weigh
- Replacement Head and Shank for Equal-i-zer 6K Weight Distribution System
- Recommended Weight Distribution Hitch for 2021 Lance 1995 with 390-lbs Dry Tongue Weight
- Recommended Shank with More Drop for Equal-i-zer 6K Weight Distribution System
- Need Shank Like What Is Included With Equal-i-zer Weight Distribution Systems
- Choosing the Correct Rise for Weight Distribution Shank
- Recommended 2-1/2 Inch Equalizer Weight Distribution Shank with More Drop
- What Causes Oblong Hitch Pin Hole On Equal-i-zer WDH
- How To Measure Trailer Frame Rail To Confirm Fit Of Equal-i-zer Weight Distribution System
- How Much Does the 6,000 lb Equal-i-zer Weight Distribution System Weigh
- Recommended Suspension Enhancement for 2016 Ford F-150 XLT Crew Cab Towing 20 Foot Pontoon Boat
- Weight Distribution Hitch With 4-Point Sway Control For 9,500 lb Travel Trailer
- Recommended Weight Distribution Shank for Equalizer EQ37100ET with More Drop Than Stock Shank
- Weight of Equal-i-zer Weight Distribution System
- Is Anything Else Needed to Install the Equal-i-zer Weight Distribution System # EQ37041ET
- Replacement Shank, Head and Hitch Ball for Equal-i-zer Weight Distribution System # EQ37100ET
- Towing a 4,500lb Jayco Travel Trailer With a 2012 Buick Enclave and 2013 Toyota Highlaner
- Shank With More Drop for Fastway Weight Distribution System