Fastway Flash Force Adjustable 2-Ball Mount- 2" Hitch - 7" Drop - 7-1/2" Rise - 10K

Video Transcript for Review of Fastway Trailer Hitch Ball Mount - Flash Force Adj 2 Ball Mount 2 Inch Hitch - FA93FR

Hi, friends, Andy here with etrailer. Let's take a quick look at this Fastway Flash Force Adjustable Two-Ball Mount for your two-inch trailer hitch receiver. Now, this is an adjustable dual ball mount that's designed to make towing different trailers easier and a whole lot more convenient. So instead of swapping out different ball mounts every time that you tow a different trailer, this one is going to let you just swap the balls out. So you've got 2 5/16-inch ball here and a two-inch ball. And lemme just show you how easy this is going to be to change ball sizes, I'm gonna remove the clips and the pin here that holds the ball in place and then you just simply rotate it just like that.

So there's your two-inch ball, 2 5/16. So that's how easy this is going to be. Obviously, you'll replace your pin and clip when you're on the ball that you want. You'll just line the holes up here and then slide that pin and clip back into place. So in terms of capacity, if you're using the two-inch ball, it's gonna be up to 8,000 pounds.

If you're using the 2 5/16-inch ball, it's gonna be up to 10,000 pounds. So as I mentioned, this is gonna fit your two-inch trailer hitch receiver. The hitch balls are chrome-plated, which is gonna help prevent rust and corrosion. So I think they're gonna hold up pretty well for you over time. Obviously, one of the biggest advantages here is going to be the ability to adjust the height, the rise, or the drop here.

So I'm gonna remove the clips and the pins here that are holding the ball platform in place. Just to show you how easy this is going to be to adjust. So this is going to adjust in one-inch increments and it slides up very easily, slides up and down very easily. This is going to give you up to about a seven-inch drop when you have the shank in this orientation. When you flip the shank over, you'll get about 7.5-inch rise.

So this is gonna make it easier to keep your trailer level regardless of your setup. And then this is also stowable. So when you're not using this, you can actually flip the ball platform back just like this. Obviously, you'll secure it again with the pins and clips to keep it in place. But when you have this stow, this is gonna help protect them out from damage. It's gonna keep it out of the way so you're less likely to damage your shins when you're walking behind your truck. So that's a great feature that's included here. So I'm gonna go ahead and put it back the way that I had it, line up the holes here, replace the pins, and I do appreciate how easy the pins slide in and out of place and I think they're gonna hold up really well for you as well. From a durability standpoint, this whole unit is made from solid forged steel. It's finished with a black powder-coat finish, a corrosion-resistant coating, so it's built to handle heavy duty towing and tough environments. It also has an anti-theft design. So when you use this with locking hitch pins that are sold separately from this, the ball mount can't be removed from your hitch. Lemme give you some measurements. Measuring from the center of the ball to the center of our first hitch pin hole, it's gonna be about 9 3/8 inches. Moving to the center of the second hitch pin hole, about 10.5 inches. And then from the center of the second hitch pin hole to the end of the shank, about 2 3/8 inches. Now, if you happen to have any other questions, whether it's about this or anything else that we have here at etrailer, don't hesitate to reach out. We do wanna make sure that you're getting exactly what you need. Well, again, my name's Andy. Thank you for joining me.