Height Above Trailer Frame of Lippert A-Frame jack part # LC285318

Question

Question:

How much clearance above the frame does this jack require? Im looking for an electric jack for my keystone bullet 2190ex, but the front bunk only leaves 25inch of space between it and the top of the frame.

asked by: Ben

0

Expert Reply:

From the bottom of the mounting plate of the Lippert A-Frame jack part # LC285318 to the very top measures 21-1/2 inches.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 24" Lift - 3,500 lbs #JET-3755 (Black) and #JET-3555 (White) both measure 23 inches from the mounting plate to the top of the jack. I have added links to some video reviews for…

view full answer...

Answer 2

When it comes to installing The Stromberg Carlson Electric Trailer Jack #JET-3555 per the manufacturer The motor unit is 4-1/2 inches by 3 inches. When it comes to the orientation of the jack you will have to turn the whole jack and not just the head…

view full answer...

Answer 3

Yes! The Stromberg Carlson Electric Trailer Jack #JET-3755 is compatible with the Lippert #LC429756 that you referenced and it does measure the 8-1/2" when retracted. You could potentially use a caster wheel like part #PS1400750340 but this…

view full answer...

Answer 4

I have a great option for you. When using the Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier for A-Frame Trailers #CC-275 there are a few parameters you will need to stay within. The bike rack needs to be travel trailer rated, fit a…

view full answer...

Answer 5

Hey Craig, yes the Stromberg Carlson Jack part #SC63VR will fit with the Lippert Jack It Bike Rack part #LC429756. The width of the jack is right at 5 inches which would easily fit between the upright bars of the Jack It.

view full answer...

Answer 6

What is probably occurring on your jack is that it has been extended too far at some point and has become stuck. Trying to move it in either direction draws too much power as the motor tries to push the leg free. This cause the fuse to blow. What…

view full answer...

Answer 7

According to my contact, the gears of their #JET-3555 are lubricated at the time of manufacture and no further lubrication of the internal gears is necessary. The only part recommended for lubrication is the inner jack tube. I've linked you to a…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 11

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 12

Hi Glen, It will depend on what the GVWR (gross vehicle weight rating) is of your trailer to determine which B&W 5th wheel to gooseneck adapter will work best for you. Fifth wheels and gooseneck trailers go off of pin weight instead of tongue…

view full answer...

Height Above Trailer Frame of Lippert A-Frame jack part # LC285318

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching