Replacement Bearing Grease Seal for 1996 Procraft Trailer
Updated 05/01/2019 | Published 04/30/2019 >
Question:
I am changing out my destroyed bearings and seal on my 1996 210 Procraft trailer dual wheels .Front left with brake drum . Procraft is out of business so I cannot get any specs on their trailers. The Seal is destroyed and has no numbers on it. The outer bearing is a L44649 and the inner is a L68149. Using just a standard tape it looks like the seal is around 2.3 outer and around 1.7. Do you think this is a obsolete Seal ? The seal is in two different pieces with no rubber seal in picture
asked by: Barry S
Expert Reply:
The Bearing Kit for #84 Spindle, L44649/L68149 Bearings, 10-19 Double Lip Seal # BK2-100 is very standard for your bearing combination. The seal however is 2.565 inches outer diameter and 1.719 inner diameter. This is by far the most common combination that fits most 3,500 lb axles.
The best way to check your actual seal requirements is to use a digital caliper for even more precision. You will measure the inside lip of your hub at the seal and then your trailer spindle at the seal location. I've attached a photo to assist as well as a couple videos on how to use the caliper.
I've linked the page to all our seals to assist once you have the measurements. Although we don't have every seal made, we do have the most common. Grease seals need to be precise so you don't end up with grease leaking and bearings that are destroyed like what you have experienced.
Product Page this Question was Asked From
Bearing Kit with Grease Cap for BT8 Spindle, Bearings L44643, Races L44610, 34823 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Bearing Kits
- Standard Bearings
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- 2500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: What Bearing Kit Do I Need For A 2019 KZ-Durango 5th Wheel With Dexter 5,200 lb Axles?
- Q&A: Where to Measure on Trailer Spindles to Determine Replacement Hubs
- Q&A: Replacement Trailer Hub Grease Seal for TCM 17255TB Seal
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Replacement Galvanized Hub For a Dexter 8-259 with a 1" Straight Spindle
- Q&A: Bearing Kit for 6,000 lb Dexter Axle
- Q&A: Replacement Hub For a 2004 Jayco Qwest Camper
- Article: Most Popular Wheel Bearings
- Article: Double-Eye Trailer Suspension System Review
- Article: Trailer Lighting Requirements
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Maintenance Schedule
- Article: Trailer Brakes Not Working? Troubleshooting Guide



