How To Install the Landing Gear Set Part # RVLG-8000

Updated 09/09/2020 | Published 04/24/2019

Products Featured in This Question

Landing Gear Set - 36-1/2" Lift - 8,000 lbs

(820)

$371.85

Replacement Weld-On 5th Wheel Landing Gear Leg Bracket for Lippert RVs

(14)

$14.42

Replacement Crank Handle for etrailer and Ram 5th Wheel Landing Gear

(60)

$27.80

Question:

Hello, Im very interested in the RVLG 8000 for use in a prototype invention. If it works well, I will want to source them for production. Do you have a video that shows the landing gear in use, and/or during installation? I watched the review video on the product page, but it doesnt show actual operation or installation. Heres a bit more info about my intended application: two sets of the RVLG 8000 landing gear will replace four jacks that Im currently using on a mobile boutique. They help me to boost a shed-like structure up from a trailer, then lower it to the ground once Ive removed the trailer from underneath. Im attaching some pics. Let me know if you have any other videos.

asked by: Doug H

Expert Reply:

The installation of the Landing Gear Set part # RVLG-8000 will be fairly straight forward. Basically, you will need to have a metal support structure so you can attach welded tabs part # LC113511 to it, 15-1/2" apart. Once these are installed you can then mount the jack tube and modify a cross-shaft that connects the two together which is included. Then, you will need to obtain a handle, the Crank Handle part # RVLG-HDL to raise and lower the legs.

Unfortunately, we do not have a video of the Landing Gear Set in use or being installed but I was able to find a photo of the weld-on brackets and cross-shaft which should give you a better idea of how they mount. I am sure you can find a general video of landing gear sets online and they won't be much different than the above in terms of use and installation.

expert reply by: Conner L

click to enlarge

Charlie

9/6/2020

I am replacing my old leaving system with the RvLG8000 but it has a pin for adjusting the legs mine has a pull pin assembly. Came I take the pin assembly of the old one and install it on the new one?

Jon G.

9/9/2020

As long as your older pull pin system fits properly on the Landing Gear Set # RVLG-8000 then you're go. We actually have an upgrade with part # RVLG-SPP if yours doesn't fit properly.