Replacement Lead and Follow Landing Gear Legs to Replace 71488 on 2012 Jayco

Updated 04/16/2019 | Published 04/14/2019

Products Featured in This Question

Replacement Follow Jack w/ Drop Leg for Stromberg Carlson Landing Gear - 29-1/2"

(186)

$245.19

Replacement Follow Leg for Stromberg Carlson Landing Gear - 33-1/2"

(40)

$247.43

Replacement Lead Leg for Stromberg Carlson Landing Gear - 33-1/2"

(49)

$250.32

Replacement Lead Jack w/ Drop Leg for Stromberg Carlson Landing Gear - 29-1/2"

(257)

$240.27

Question:

my 2012 Jayco 365bhs has a Atwood 71488 driver leg I need both the driver and the slave leg everyone says I need an LG179013-014 but these black tubes are 29 1/2 in long the atwood is 36 1/2 inch tube even though the welds are the same at 15 1/2 and 17 1/2 the main tube is much longer on the atwood??? anythoughts

asked by: David C

Expert Reply:

Landing gear legs # LG-179014 and # LG-179013 may have slightly different dimensions from the OEM units they replace but these parts are usable replacements for the popular LG-1, LG-3, and LG-183708 landing gear sets. Part 71488 was made by RBW which is no longer in business.

We also have a longer 33-1/2-inch leg for the LG-2 and LG-4 landing gear, parts # LG-177202 and # LG-177201. These have the same 4000-lb rating and the same 17-1/2-inches between their stops. If you prefer you can use these since they have the same 19-7/8-inch travel as jacks # LG-179014 and # LG-179013. Shorter tubes may give you more ground clearance.