What Type of Lug Nut Should Aluminum HWT Series Wheel part # AM22318HWT Use

Question

Question:

Are these wheels for lug bolts with cone seats or radius seats? I know theyre 1/2x20 but I cannot tell from looking at the wheels whether they need bolts that are coned or radiused. Thanks

asked by: Evan

0

Expert Reply:

The recommended lug nuts to use with the Aluminum HWT Series Wheel part # AM22318HWT is the part # 12CLN which is a 60 degree coned lug nut.

expert reply by: Jameson C

0

Answer 1

Hey Sam, thanks for reaching out. Yes the 4 on 4 bolt pattern is standard for 4-lug wheels. Unless you have some kind of weird agricultural wheel or really old vintage wheel, if it has 4 lugs, they will be 4" apart across. As far as the 12"…

view full answer...

Answer 2

While we don't currently offer a more narrow propane tank mount to fit between your 8-1/8" crossmembers I do have a a possible solution for you. The first being that you mount a board with the same or greater thickness as the vertical…

view full answer...

Answer 3

To add a third brake light to a trailer is pretty simple, but does require an adapter to convert the signal. Because trailer tail light systems combine the stop lamp and turn signals for each side onto a single circuit, you will need to use a…

view full answer...

Answer 4

Aluminum wheels actually have steel inserts where the lug nuts touch them so there is no need for an adapter and you can just bolt the wheel right up. I don't know what size wheel you are looking for but I attached a link to all the aluminum…

view full answer...

Answer 5

Stainless steel lug nuts will work great with the Kenda KR25 Radial Trailer Tire with 12" Aluminum HWT Wheel #AM31208HWT. There are sleeves in the wheel that are steel which prevents issues from dissimilar metals. I attached a picture where you…

view full answer...

Answer 6

For a high-quality trailer tire that is size 4.80-12 and wheel with a 4 on 4" bolt pattern I strongly recommend the Kenda KR25 ST145R12 Radial Trailer Tire with 12" Aluminum Wheel #AM31208HWT. This wheel and tire combo is load range D with…

view full answer...

Answer 7

I looked up pictures of your 2007 Jayco Jay Series 1007 and it looks like it has the same style of taillight as the part #30-92-003. The great thing is that most trailer taillights are all basically the same designs across a few manufacturers so if…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 11

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

What Type of Lug Nut Should Aluminum HWT Series Wheel part # AM22318HWT Use

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching