Suspension Enhancement to Reduce Squat Experienced When Trailer is Hitched to 2006 F350 Dually
Updated 01/03/2012 | Published 01/01/2012 >
Question:
I have a 2006 F-350 Crew Cab Duelly which I use to tow a 4 car trailer for work. When I load my trailer, the rear of my truck sags approx. 6inch which I know is no good for my truck. I have been told that I should add a extra leaf spring which will raise the rear of the truck approx. 2inch and solve my problem. If I install this product will it solve my problem? Will the rear of the truck sage? I am trying to find a product that will absorb the weight when Im towing approx. 10 hours per day and maintain the truck level while towing. If I add the extra spring it will raise the truck which I do not want,Thank You.
asked by: Robert B
Expert Reply:
Adding an additional leaf spring would somewhat increase the height of the rear of your truck, as you suspected.
A suspension enhancement product like the Timbren part # TFR350SDF you mentioned is primarily designed for loads placed in the truck bed. In most cases, using this product will somewhat decrease the squat you are experiencing, but the weight being applied to the rear of the vehicle will lighten the front end, resulting is decreased front braking performance and steering response.
A better option for your needs would be a weight distribution system. A weight distribution system uses spring bars under tension to provide leverage that distributes a portion of the trailer tongue weight to the front axle of the tow vehicle, thus balancing the suspension height between the front and rear axles.
I will link you to our FAQ article about weight distribution which will explain the concept further.
Weight distribution systems are classified by the loaded and ready-to-tow tongue weight of the trailer. If you could provide the as-loaded tongue weight of your trailer, I would be happy to suggest a system that would work for you.
Product Page this Question was Asked From
Timbren Rear Suspension Enhancement System
- Vehicle Suspension
- Towing/Load Leveling
- Bump Stops
- Suspension Only
- Extra Heavy Duty
- Rear Axle Suspension Enhancement
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Video: Curt 5th Wheel/Gooseneck Custom Wiring Harness Installation - 2023 Chevrolet Silverado 2500
- Video: Hands-On with the 4" Offset Ball for B and W Turnoverball Gooseneck Trailer Hitches
- Shop: Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector and Cover Plate - 7' Long
- Shop: Curt Gooseneck Coupler - Adjustable - Round - 2-5/16" Ball - 30,000 lbs
- Q&A: Best Timbren Suspension System For 2008 Ford F-350 For 5th Wheel & Truck Bed Camper
- Q&A: Camper Tie Downs for 1997 Ford F350
- Q&A: Which Timbren Kit HD or Lighter Duty for 2016 Ford F-350 That Hauls Campers Frequently
- Q&A: Which Timbren Suspension Enhancement Kit Fits a 2006 Ford F-350 Dually?
- Q&A: Compatibility of Timbren Jounce Spring Kit # TFR350SDF with 2008 F350 with B&W Turnover Hitch
- Q&A: Does Lippert 12" Electric Brake Assembly ABS Need To Be Programmed Or Paired For Setup?
- Q&A: Timbren Rear Suspension Enhancement for a 1989 Ford F-250 GVW of 6600 lbs
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Mount a Truck Bed Camper
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: Should You Add an Air Compressor to Your Air Bags?
- Article: How to Measure for Travel Trailer and Fifth Wheel Steps
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams



