Will Roadmaster Comfort Ride Leaf Spring Suspension Kit Work on 7,000 lb Axles
Updated 04/02/2019 | Published 04/01/2019 >
Products Featured in This Question
Question:
Roadmaster RM-2460-2570 leafspring and shock system for 5th wheel Hello, I have a Grand Design Solitude 310GK 5th wheel. I had a leafspring break and am now considering the Roadmaster system. My axles are rated at 7,000 lbs. and Im wondering if the Roadmaster system is adequate at the 7,000 max for my 5er or I should consider an 8,000 system to have some additional margin. I dont know the impact of using a higher rated system on 7,000 lb. axles. I also have Sailun tires which are a stiffer harder tire and not sure how this will work with the entire system. Thanks much,
asked by: Mary L
Helpful Expert Reply:
The Roadmaster Comfort Ride Leaf Spring Suspension Kit # RM-2460-2570 will work perfectly on the 7,000 lb axles of your Grand Design Solitude as it was specifically designed for 3" diameter axles with that rating. The # RM-2470-2580 is designed for 8,000 lb axles (3-1/2" diameter) axles as opposed to 7,000 lb axles.
It is certainly natural to wonder but there isn't any additional margin required as this system meets the ratings for your axles.
The Roadmaster Comfort Ride Leaf Spring Suspension Kit # RM-2460-2570 is going to give you a much more comfortable towing experience with its shock absorption, particularly since you have tires that have a bit of a stiffer ride.
Product Page this Question was Asked From
Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers - Tandem 7K Trailer Axles
- Trailer Suspension Parts
- Equalizer Upgrade Kit
- Leaf Spring Replacement System
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- 7000 lbs
- Round Axle - 3 Inch
- Tandem Axle
- Roadmaster
more information >
Featured Help Information
Instructions
Continue Researching
- Search Results: roadmaster 2460
- Search Results: morryde x~factor
- Video: Installation Guide Roadmaster Comfort Ride Leaf Spring Suspension Kit - 2021 Grand Design Solitude F
- Shop: Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers - Tandem 7K Trailer Axles
- Shop: U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7-1/16" Long U-Bolts
- Video: Roadmaster Comfort Ride Leaf Spring Suspension Kit Installation - 2013 Dutchmen Voltage 5W Toy Haule
- Q&A: What is Wheelbase of Roadmaster Comfort Ride Suspension System
- Shop: Lippert Trailer Suspension Wet Shoulder Bolt - 9/16" x 2-13/16" - Qty 4
- Shop: MORryde X-Factor Crossmember for Standard Frame Hangers
- Shop: Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shocks - Tandem 8K, 3" Trailer Axles
- Shop: Long U-Bolt Kit for Roadmaster Comfort Ride Suspension System - For 3" Diameter Axles
- Shop: Spare Tire and Carrier for Yakima EasyRider Trailer
- Q&A: U-Bolt Kit and Bracket for a 3" Trailer Axle
- Q&A: How Do I Measure Axle Spread for Upgrading The Trailer Equalizers?
- Video: The Low-Down on the U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles
- Video: Complete Breakdown of the U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles
- Video: Roadmaster Comfort Ride Leaf Spring Suspension Kit Installation - 2020 Grand Design Momentum 5W Toy
- Search Results: morryde pin box parts
- Q&A: Wet Bolt Recommendation For the Roadmaster Comfort Ride Leaf Spring Suspension Kit
- Q&A: Do Roadmaster Comfort Ride Leaf Springs Require New Bushings
- Q&A: Is Lubrication Required for the Roller Pin on the Roadmaster Comfort Ride Slipper Spring System
- Q&A: Do Bronze Bushings Need to be Used with MORryde X Factor and Roadmaster Comfort Ride
- Video: All About the MORryde X-Factor Crossmember for LRE, RE, or TRE Leaf Spring Suspension
- Video: A Look at the MORryde Cushioned 5th Wheel Pin Box
- Search Results: trailer suspension parts
- Shop: Fifth Wheel Hitch
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)

