Cover Recommendations for a 2019 Forest River Explore Rockwood HW296 Pop-Up Camper

Question

Question:

I’m trying to find a cover for my 2019 Rockwood HW296. Per specs it is 255in long. 80in high and 84in wide. Also has low profile roof air. Any suggestions would be greatly appreciated.

asked by: Jason

0

Expert Reply:

The Adco SFS AquaShed # 290-12252 is a great fit for your pop up camper. The heavy duty cover protects from wind, sun, rain and snow and reduces the need for washing and waxing in the off-months.

expert reply by: Jon G

0

click to enlarge

Answer 1

Hey, Mark! Sure do! We have 1" which is part #165686 and 7/8" which is part #165931. They don't come with a cotter pin so you would also need part #165649. If that's all you need then you're all set!

view full answer...

Answer 2

An option is the Classic Accessories Deluxe PolyPro III Heavy-Duty Pop-Up Camper Cover - 18' - 20' Long #CA80043. This has a cover height of 42 inches as you mentioned, but it also has a width of 88 inches and is made to work well with AC…

view full answer...

Answer 3

The brake shoes you need are going to depend on the diameter of your current assemblies and the weight capacity of your axle. The #AKBRKR-S-10 are replacement brake shoes for 10" diameter x 2-1/4" thick manual-adjust, electric trailer brake…

view full answer...

Answer 4

Based on my research your 2016 Rockwood HW276 Pop-Up camper has a closed length of 19.3 Feet. With this in mind the Classic Accessories Deluxe PolyPro Heavy-Duty Cover #CA80043 you referenced will work perfectly, even with an AC unit at the top of…

view full answer...

Answer 5

The Forest River Rockwood HW277 measures 25 foot long. When the camper is closed for storage, I would recommend the ADCO #290-12253 AquaShed for UV, dust, and weather protection.

view full answer...

Answer 6

If you only have the nut and a washer but no cotter pin or retaining type washer on the end then that isn't correct and you want to get a piece to help prevent that nut from backing off. If you have a setup like the Spindle Nut Kit for EZ Lube…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Cover Recommendations for a 2019 Forest River Explore Rockwood HW296 Pop-Up Camper

Continue Researching