Replacement Tail Lights for a 2017 Thor Quantum 31WS Class C Motorhome
Updated 06/09/2020 | Published 03/28/2019 >
Question:
Would these be good taillights replacement for a 2017 Thor Quantum 31WS class C rv? By looking at it looks like the screw holes dont match the one that came originally equipped from the Thor manufacture. Thank you
asked by: Michael V
Expert Reply:
If you want to swap out your current tail lights on your 2017 Thor Quantum 31WS with the Bargman Triple Trailer Tail Light # 30-84-509 then you can, but if the bolt holes don't match up you may need to drill new holes. Attached is a photo showing the dimensions of where the bolt holes line up.
You might also consider the Bargman # 47-84-009 LED triple tail lights measuring 14" x 7" with 36 diodes.
If neither of these options matches very well with what you already have and you would like to keep from drilling new holes just let me know the dimensions of your mounting holes on your RV and I can make a different recommendation.
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: brake light
- Shop: Triple LED Trailer Tail Light - Stop, Tail, Turn, Backup - Red and Clear Lens - Qty 1
- Shop: Excel RV Tankless Water Heater - 38,000 Btu - Vent Free
- Shop: Replacement Lippert Control Panel with Amp Connector for 4-Point Leveling System
- Video: What to Know About the LED Tail Light for RVs Under 80" Wide
- Shop: Curt Universal Fifth Wheel Base Rails with Installation Kit - Carbide Black Finish
- Shop: Progressive Dynamics 4500 Series Inteli-Power Converter - 75 Amp
- Shop: Trailer Wiring
- Shop: UltraThin ID Light Bar for Trailers over 80" Wide - Submersible - 3 Diodes - Red Lens
- Shop: ThinLine LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 9 Diodes - Oval - Red Lens
- Video: The Low-Down on the Triple LED Trailer Tail Light
- Search Results: clearance light
- Search Results: slideout roller
- Search Results: tankless
- Search Results: trailer lights
- Search Results: trailer tail light
- Search Results: trailer light
- Video: Review of Blue Ox Replacement Tow Bar Rubber Sleeves - BLU44HR
- Q&A: Solution for Replacement Strut for Carefree Awning
- Shop: Base Plate for Tow Bar
- Q&A: Replacement Converter For Progressive Dynamics PD4575K18L
- Article: What Jeeps Can Be Flat Towed?
- Article: Best Vehicles to Flat Tow Behind an RV
- Q&A: Parts Needed to Tow a 2019 Chevrolet Spark Behind a Motorhome
- Video: Mount: Blue Ox Base Plate Kit on a 2020 Jeep Wrangler Unlimited
- Video: Best 2019 Chevrolet Spark Flat Tow Set Up RM-523202-5
- Video: How to Install: Roadmaster Falcon 2 Tow Bar on your 2020 Jeep Wrangler
- Shop: Fifth Wheel Hitch
- Q&A: Wiring Installation on Command Electronics Triple LED Trailer Tail Light



David R.
6/5/2020
Two common problems with these lights, water inside the lights and they do not come with mounting screws. Stainless screws #7 x 1 1/4" fit perfectly. I put a small bead of silicone around the back of the light between the back plate and the front cover. While the silicone was still sticky put the foam back pad back on the back of the tail light. After the lights are mounted, put a small dab of silicone on the screw heads. I don't expect any issues with the lights and it was simple to fix the little problems. Obviously you would not want to seal them up like this if you had the older bulb type lights that you will need to change.