Options for Running Power Wire of Curt Trailer Wiring Harness # C56377
Updated 03/20/2019 | Published 03/19/2019
Question:
What options do I have to get the battery wire from the battery to the back of the car and the black box it needs to connect it to.
asked by: John M
Expert Reply:
The connection to the battery is something that many people have reservations about until they actually start the process and realize that it is not so bad. There are different ways you can get to the battery and we actually wrote an FAQ article on this topic which I have linked for you. The FAQ gives general tips on different methods for routing the power wire.
You can run the wire through the vehicle if you wish but just keep in mind that this does take more time and you may end up needing additional wire because you will not be routing the wire in a straight line.
As far as mounting the 4-Way end under the vehicle, that, too, can be accomplished though there is some extra work involved and you may have to drill through the bottom of the vehicle. You would need to remove as much flooring as you can from the cargo area in the van, getting down to the bare metal. At this point you would need to locate a grommet or other opening through which you can route the wiring. However there is a good chance any grommet you find will not be large enough to accept the 4-Way.
You would have to cut the wires leading from the converter box to the 4-Way then route the cut end through the grommet, seal up the grommet, and reattach the wires to the converter. Or you can use a hole saw to cut a large enough hole so you do not have to cut and splice the wires. If you must drill you will need to be aware of what is on the other side of the drilling location and you will have to find some way to seal up the hole like a rubber plug and sealant obtained locally.
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- Powered Converter
- No Tow Package
- 4 Flat
- Plug and Lead
- Plug-In
- Hidden
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: 2" trailer hitch
- Shop: Curt Towing Starter Kit for 2" Hitches - 2" Ball - 3/4" Rise, 2" Drop - 7.5K
- Search Results: 1 7 8 ball mount
- Search Results: trailer hitch cover
- Search Results: flat tow wiring harness
- Shop: Trailer Wiring
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Q&A: Can the Rear Accessory Socket on a 2017 Mazda CX-5 be Used to Power the T-One # 118746
- Video: DIY Install: Curt Towing Starter Kit for 2" Hitches on your 2020 Tesla Model Y
- Shop: Trailer Hitch
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2018 Mazda CX-5
- Video: All About the Lets Go Aero Jack-It PLUS Bike Rack for 2 Bikes
- Shop: Lets Go Aero Jack-It PLUS Bike Rack for 2 Bikes
- Search Results: trailer hitch
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer wiring
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Video: Clean Up Your Trailer Wiring
- Article: How to Measure for Trailer Hitch Drop
- Search Results: trailer tires and wheels
- Shop: Suspension Enhancement
- Shop: Brake Controller
on Custom Fit Vehicle Wiring
