Ladder Rack Recommendation for 2018 Toyota Tundra with Longer Load Bars

Question

Question:

Do you have load bars longer than 65,I need 74 or 75.Thanks

asked by: Jim B

0

Expert Reply:

For your 2018 Toyota Tundra we have the Thule Xsporter Pro Truck Bed Ladder Rack # TH500XTB as a confirmed fit which has 72 inch long load bars which is the longest crossbar solution we have. This also has adjustable height bars as well. I attached an install video for the silver version of this rack on a similar 2016 Toyota Tundra for you to check out as well.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 4

Hi Steve; the factory hitch on the 2013 Tacoma has the bumper brackets integrated into the hitch. You can replace it with the etrailer Trailer Hitch #e98850 but you will have to remove the old hitch and find new bumper brackets to complete the…

view full answer...

Answer 5

The aftermarket hitches for a 2011 Toyota Tacoma don't fit alongside the factory installed hitch; some trucks have hitches you can add on to OEM hitches that fit underneath the original. So I can't see any reason why you wouldn't be able…

view full answer...

Answer 6

Hey Daniel congrats on the new truck! The Lomax Stance Hard Tonneau Cover item #LOM54RV does indeed fit the 2026 Chevrolet Silverado EV with the Mid Gate. It also works with the Multi-Flex Tailgate that comes on the Trail Boss models. For a…

view full answer...

Answer 7

Hey Todd! Yes, the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack w/ Tonneau Cover Adapters #Y01151-5755 is compatible with the Synetic MR Retractable PRO Tonneau Cover on your 2025 Toyota Tacoma. The adapters will fit the T-slot rails on that…

view full answer...

Answer 8

Yes, it does John. The OBD2 is the diagnostics port that repair shops and inspection places use to connect to your 2012 Tacoma's computer. The electric brake control harness on your 2012 Toyota Tacoma will be located underneath the drivers side…

view full answer...

Answer 9

Since the clamps for the Thule TracRac TracONE Ladder Rack #TH27000XTB-XK4B go over the bed rails of your 2021 Toyota Tacoma this means you'll need to go with a different ladder rack if you're also wanting to install a tonneau cover. For your…

view full answer...

Ladder Rack Recommendation for 2018 Toyota Tundra with Longer Load Bars

Featured Help Information

Miscellaneous Media

Continue Researching