Does Curt Hitch # C13395 Fit 2019 Jeep Cherokee and Require Fascia/Bumper Trimming

Question

Question:

Does Curt hitch #C13395 require any trimming of the rear bumper cover around the hitch?

asked by: Michael H

1

Helpful Expert Reply:

The Curt trailer hitch part # C13395 that fits your 2019 Jeep Cherokee does not require any rear fascia or bumper trimming to install! I attached a picture of what this hitch looks like when installed as well as a link to the detailed install instructions for more info as well.

expert reply by: Jameson C

1

click to enlarge

Answer 1

I have a great hitch for your 2019 Jeep Cherokee Latitude. It is the etrailer Hitch item #e73ZR. This custom fit hitch bolts directly to your Cherokee's frame with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 2

The etrailer Hitch part #e73ZR is what I recommend for a 2021 Jeep Cherokee. It offers a bolt-on fit for all models including the Latitude. It has a hidden design therefore the crosstube is tucked behind the bumper. This makes for the best ground…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 7

While there is one hitch for your 2021 Jeep Cherokee Trailhawk that exits through the bumper, the #e73ZR does not, as the receiver will be below the bumper of your Jeep. The only option for a hitch that protrudes the bumper of your Cherokee Trailhawk…

view full answer...

Answer 8

Hello Sadie, Thanks for writing in. For your 2021 Jeep Cherokee, I'd recommend going with a Class III hitch with a 2" receiver since you're planning to carry two e-bikes and may eventually tow a small boat trailer or lightweight camper.…

view full answer...

Answer 9

Hey Tony! The estimated installation time for the Romik RAL-S Running Boards w/ Custom Install Kit #RMK39RR is one hour. These are designed to fit the 2017 - 2026 Cadillac XT5. Do you plan on installing these yourself?

view full answer...

Answer 10

Sorry about the confusion. The Curt #C13398 and #C13171 and the etrailer brand #e73ZR would all fit the 2019 Jeep Cherokee Trailhawk. Of the various options, a top choice would be the etrailer #e73ZR because once installed it would be the most…

view full answer...

Answer 11

There are three differences in the two receivers. The etrailer Hitch item #e73ZR mounts slightly higher and will offer more ground clearance but the installation is more difficult. The Curt Trailer Hitch Receiver item #C13395 has a higher towing and…

view full answer...

Answer 12

Hello Catherine, Happy to get the right wiring set-up for your 2021 Jeep Grand Cherokee. Since you need a 7 way on the back, you will need to start by installing the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C62VR,…

view full answer...

Does Curt Hitch # C13395 Fit 2019 Jeep Cherokee and Require Fascia/Bumper Trimming

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching