Does Draw Tite Hitch # 75902 Fit 2019 Nissan Rogue and Allow Liftgate Sensor Access

Question

Question:

Will a trailer hitch affect my power liftgate on my 2019 Nissan Rogue?

asked by: Mike V

0

Expert Reply:

The Draw-Tite Max-Frame Trailer Hitch Receiver # 75902 is a confirmed fit for your 2019 Nissan Rogue. Based on its design, it will not change the tail gate lift sensor. You will still be able to utilize that feature to the left or right of the center receiver tube.

expert reply by: Jameson C

0

Answer 1

Yes, we have had issues in the past with trailer hitches and accessories affecting the Rear Automatic Braking system on the 2019 Nissan Rogue. Basically it will detect the hitch and carrier and may cause the brakes to activate while you are backing…

view full answer...

Answer 2

For your 2018 Nissan Rogue I recommend the Draw-Tite Class II Frame Receiver Hitch #36542. This Class II hitch is confirmed to fit your vehicle and will use existing holes in its frame for a no-drill installation. The motion sensor on the rear gate…

view full answer...

Answer 3

Hi Lynita, For a trailer hitch that fits your 2019 Nissan Rogue and doesn't require any type of drilling into your frame, use the following: - etrailer Trailer Hitch Receiver #e98846 The #e98846 has a 500 lb tongue weight capacity, which is more…

view full answer...

Answer 4

The Draw Tite hitch part #36542 that you referenced fits the following: 2008 - 2020 Nissan Rogue 2014 - 2015 Nissan Rogue Select 2010 - 2011 Nissan Rogue excluding Krom

view full answer...

Answer 5

We do not have a complete kit for all of the items you are looking for but I can make recommendations for each of the items you asked about. We have trailer hitches that have a 1-1/4 inch receiver opening that will work with your 2015 Rogue. I…

view full answer...

Answer 6

Yes, the etrailer Trailer Hitch Receiver item #e98846 fits all models of the 2019 Nissan Rogue including the special edition. This hitch is custom fit and bolts directly to your frame with included hardware. It installs in preexisting holes and does…

view full answer...

Answer 7

Hey Philip, it looks like you bought the etrailer hitch part #e98846 which fits the 2008-2020 Nissan Rogues. I believe you meant to type 2020 Nissan Rogue as the Rogue wasn't made in 2000. You will need new hardware to install the hitch since it…

view full answer...

Answer 8

The Draw Tite hitch part #75902 which is a fit for your 2017 Rogue will allow you to use the hands free lift gate. You will just need to kick to either side of the hitch opening.

view full answer...

Answer 9

There are some subtle difference between the Kuat Piston Pro Bike Rack for 2 Bikes #KU76ZR and the Kuat Piston Pro X Bike Rack for 2 Bikes #KU98VR. Overall the two racks are very similar, there are just some subtle differences/upgrades on the Piston…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

Since Husky fifth wheel hitches are compatible with Industry Standard fifth wheel rails, it would work just fine with a Reese 5th Wheel Adapter, #RP30154 installed in your 2013 Ram. The Husky 5th wheel hitch would pin or bolt in place using the…

view full answer...

Answer 12

Hi Jerry, For your 2025 Kia Sorento PHEV you would need the Curt Trailer Hitch Receiver #C37RV for the trailer hitch. The right light kit for your Sorento is going to depend on a few factors. For models with the tow package, like you stated you have,…

view full answer...

Does Draw Tite Hitch # 75902 Fit 2019 Nissan Rogue and Allow Liftgate Sensor Access

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching