Will Wheel With 4 on 110mm Bolt Pattern Fit 4 on 4 Bolt Pattern Idler Hub

Updated 03/11/2019 | Published 03/10/2019

Products Featured in This Question

Dexter Trailer Idler Axle w/ Idler Hubs - EZ-Lube - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs

(414)

$269.42

Replacement Trailer Hub Bearing - L44649

(2136)

$22.22

Question:

Can you tell me if a 4/110 hub will fit this hub. Also how large is the center portion that the rim fits over. Thanks

asked by: Chris

Expert Reply:

If you have a wheel with a 4 on 110mm bolt pattern then it will not be compatible with the 4 on 4" bolt pattern of the hub that comes with the Dexter Trailer Idler Axle w/ Idler Hubs # 20440I-EZ-60. You will need to either upgrade your wheels to match this bolt pattern or check to see if your current hub has a # L44649 inner and outer bearing as well as a seal with an inner diameter of 1.50".

I went out to the warehouse and found that the center portion measured 2-1/2" in diameter.

If you would like to upgrade your wheel just let me know what tire size you need and I can make a recommendation for you.

expert reply by: Jon G