Which Bolt Hitch Lock Keys to 2019 Ford F-350 Key

Question

Question:

Is the one that will work with A 2019 F350

asked by: Fred F

0

Expert Reply:

The key of your 2019 Ford F-350 should look like the keys in the attached picture which is what the Bolt lock part # BL7023585 is designed to fit. This would be the Bolt lock hitch lock you'd need which will key to your truck's key.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Hey Terry! In order to mount the CE Smith Fenders #CE19504-2, normally I recommend #CE26098G-2 or #CES54XR (x 2) depending on your application. Do you know if you need the 90 degree bend to attach to the frame of the trailer, or the straight bracket?…

view full answer...

Answer 2

Hey John! You can use the Mounting Bracket for Trailer Fender #CE26098G to install the CE Smith Single Axle Trailer Fenders #CE19504-2. As for the actual hardware, 3/8" stainless bolts, stainless flat washers, and stainless nylon lock nuts would…

view full answer...

Answer 3

Thanks for the pics Kemo, they really helped! The CE Smith Single Axle Trailer Fenders #CE19504-2 are larger than what you currently have and use a different mounting style. Based on your setup, the CE Smith Fenders wouldn’t bolt onto your existing…

view full answer...

Answer 4

Hey Dean. Unless your trailer already has brackets, you'll want to use the CE Smith Galvanized Steel Step for Trailer Fender item #CE26212G to attach the CE Smith Single Axle Trailer Fender w/ Top and Side Steps item #CE19504 to your trailer. The…

view full answer...

Answer 5

Hey robert, Your 2024 Ford F-350 should have the center cut key, but you can easily pop your key out of the FOB to confirm. We offer the following BOLT locks for this key style: BOLT Trailer Hitch Receiver Lock - 2", 2-1/2", and 3"…

view full answer...

Answer 6

Hello Johnny, thanks for reaching out. The bracket that goes with the CE Smith Single Axle Trailer Fenders w/ Top and Side Steps CE19504-2 is our part number #PF1135-BKT-2. The brackets are 2-3/4" wide x 13-1/4" long. I have included a…

view full answer...

Answer 7

Hey Joe, I attached a picture below that shows the full instructions I got for the Blue Ox wiring kit part #BX88285 that you referenced. Let me know if you think you could pull off the install.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Which Bolt Hitch Lock Keys to 2019 Ford F-350 Key

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching