Tonneau Cover Recommendation for 2019 Honda Ridgeline that Allows Trunk to Open Completely

Question

Question:

One concern with the BAK Revolver X2 for the Ridgeline is that its rails limit the truck bed’s compartment opening to about 75. The compartment’s lid normally opens above the sides of the bed, but not with the Revolver installed. Curious whether the TRUXEDO SENTRY Cover’s rails get in the way of the compartment’s lid as well.

asked by: John

0

Expert Reply:

I have a tonneau cover solution for your 2019 Honda Ridgeline that is going to allow you to fully open your truck but it's not the Truxedo Sentry either as the rails would interfere. Instead you'd want the Extang Trifecta 2.0 part # EX92590 which folds up and doesn't require a rail to install on the bed rails.

expert reply by: Jameson C

0

Alan

3/2/2020

do you have any pictures or video post that show any tonneau cover you sell for a honda ridgeline 2017-2020 with trunk in the bed open so you can actually see what it looks like either 75 open as you discuss ?

Chris R.

3/3/2020

Check out the video linked below that shows us installing the canvas version (part # EX94590) on the 2019 Ridgeline. If you skip ahead to the 1:30 mark you can see our installer open the trunk with the cover folded up. Since it doesn't require its own rails to be installed in the bed it won't limit this function.

Helpful Links

tv-install-extang-soft-tonneau-cover-2019-honda-ridgeline-ex94590.aspx

Answer 1

A great folding tonneau cover for your 2022 Honda Ridgeline is the Extang Trifecta ALX Soft Tonneau Bed Cover - Folding - Vinyl #EX98CV. The advantage of this cover over other Trifecta models is that it comes with a secure rotary release latch and an…

view full answer...

Answer 2

The Extang Trifecta Signature 2.0 #EX94590 has aluminum frames under the tarp, so rarely is any of the weight that is placed on the tonneau ever going to be fully supported by the tarp itself. The tarp on the Trifecta comes permanently attached to…

view full answer...

Answer 3

I do have an option for you but the TruXedo Pro X15 Soft Tonneau Cover part #TX1430601 will only allow you to open the in-bed trunk about 80% of the way because the rails sit inside the bed around an 1" or so on each side. If you want to be able…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 10

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Tonneau Cover Recommendation for 2019 Honda Ridgeline that Allows Trunk to Open Completely

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching