To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Getting into your truck bed shouldn’t be a hassle. The Trifecta Signature 2.0 uses a tri-fold layout that lets you open just the rear panel when you need to grab something fast, or fold back two-thirds of the cover when you’re hauling taller gear. The panels lift easily and secure with integrated buckles at the cab, so you can keep driving with most of the bed open. When it’s time for full access, the whole cover lifts off by releasing the Jaw-Grip clamps at the front.
The premium canvas top is backed with vinyl and permanently attached to the frame for a tight, smooth fit. It won’t shrink or balloon like basic vinyl covers, and it stays quiet at highway speeds. Snap-on rubber seals run around the perimeter to help keep water out of the bed, while fiberglass-reinforced nylon clamps lock it down tight when the tailgate is closed and locked. The result is a clean, weather-resistant seal that helps keep your cargo dry through rain and wash cycles.
This cover is made for everyday use in all kinds of weather. The lightweight aluminum frame and bows are coated in durable black powder to resist rust. Reinforced nylon hinges add strength where it counts, and everything is sewn into the perimeter frame instead of using hook-and-loop strips. That solid construction gives it better support under snow or debris buildup and keeps the fabric from sagging over time.
Installation doesn’t get easier than this. The Trifecta Signature 2.0 comes fully assembled with all mounting hardware built in—no separate bolts or drilling required. The included rails bolt into the factory tie-down hook holes using existing hardware, and the self-contained clamps on the cover snap right onto those rails. That means you can install or remove it in minutes whenever you need to switch between covered storage and open-bed hauling.
The matte black canvas gives this soft cover a clean look that complements any truck without adding bulk. Sitting about 1" to 1-1/2" above the bed rails, it keeps a flush profile while reducing drag for improved fuel efficiency. The fabric stays taut in heat or cold, so it looks sharp year after year without fading or wrinkling.
Alternate Instructions
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
Ratings & Reviews
This product is the best out there! I have had this on my truck for a year and it still looks new and working perfectly.
Excellent fit-- extremely waterproof, cleans easily w detergent
East to install. Have had it for year, still looks brand new. Easy to keep clean, no fading. Love the ability to fold it, but not remove it to put things in the bed of my truck. But have removed it for larger items, and is is simple and tasks only a few minutes. Great buy and look forward to using it for another year.
Great product. Fast shipping. Very sati sfied.
This cover is so much richer looking than a plain vinyl tonneau cover. The canvas cover never looks dirty. It is just a great cover.
This is my first tonneau and I am very happy with how easy it is to install and how versatile it is. Having used a canopy for years, this suits my current needs perfectly.
Great tonneau cover! Fits well, easily flips up for access or to haul something sticking up out of the rear of the truck bed. Only takes 30 seconds to completely remove if hauling something bigger in the bed. After a year the vinyl backed canvas has not shrunk, is still a deep black and has not faded at all.
Great fit, very easy to install, appears to be very well made. There is no noticeable flapping or movement of the cover at highway speeds. Love that there are no installed side tracks allowing a quick return to original bed if required. Bed and contents stay dry even when parked in the rain.
I love this cover. Very easy to install and when you need to remove it, also very easy. Looks great. I paid about $100 more by buying from etrailer. Go to Extang and buy direct, much cheaper.
This is my second Tonneau cover from Extang. The first was 1.0 I like the look of the 2.0 better, but the functionality of the 1.0 seems better to me. One of my tailgate-end hold-downs keeps sticky, and I have to futz with it to get it to clamp. I also wish the next version would have a way to keep the front straps from sliding from their useful position when the cover is down. In the end, if I buy another pickup, the first accessory I buy will be another Extang!
Very nice quality and price. It was very easy to install and remove. It keeps the elements out of the bed of the truck.
This is a very good quality durable cover on a long bed Ford. It has held up with 12" of snow on it and kept items dry on a 4k mile trip. I highly recommend this cover
Second Extang canvas cover we have owned. Think they look better and hold up excellent, fit was perfect and easy install and remove in a minute if we have to. First time dealing with e-trailer and everything was flawless, thank you! 2018 Toyota Tundra Crewmax,1 year review.
The Extang tonneau cover has been great. 3rd one we’ve owned. The canvas fabric is a little different than the last 2 but seems to be holding up well. Easy to install/remove. We would buy this cover again.
Excellent cover for my F350 (2019, Short Bed). Still looks new after a year. Good things:
- Easy installation with good fit.
- Keeps bed and contents dry. (I also love my BedRug XLT, so a small amount of water wouldn't be noticed anyway.)
- Quick and easy to fold to cover front 1/3 of truck bed (< 1 minute).
- Easy to remove (< 3 minutes).
- Very little movement, even at freeway speeds.
- Cleans easily: Blow off dust. Spray off bird droppings.
- Looks good: Much better than cheapie vinyl covers.
So far, so good! The instructions can get kind of confusing though since they are general for many types of truck beds. Mine is a 2013 Totyota Tacoma with the 6' bed. For this truck bed, you need to install the brackets on the utility rails for the 4 fasteners to lock onto. Set the brackets in a way that the fasteners are centered on the brackets; that way you can make minor adjustments to the position of the tonneau cover without having to re-position the brackets themselves.
Great product. Still looks great!
Love it so far! Easy to install, take down and put back up.
After one year it still looks like it just came out of the box. Easy to use and looks great.
One year and no rips, stains, or fading. Also, easy to take off and put back on when we use our truck bed tent. But, I still haven't figured out when to use those two extra strap clips. Don't need them to tie down the folded cover, don't seem to attach to the truck bed. I guess it's just a tonneau cover mystery.
Installation on my 2019 Honda Ridgeway was a snap following Utube instructions. Bed remains dry in heavy snow and rain , even at highway speeds. Easy to remove and store during summer months when I am hauling bikes.
Steve
10/31/2021
Excellent
Not too difficult to install and this has been a real help to me in protecting items when travelling. Plus it looks great. A screw connecting a cross bar to the frame came out after about 9 months, but it was an easy size to replace.
Gwendolyn Y.
2/16/2025
Hey Deadra. I'm glad that you are still loving your cover even after a year of having it. Hopefully no more screws find their way out.
Deadra
2/18/2026
Still loving this cover. Still looks great. Ive taken it off several times to carry oversized items or beds full of mulch. Occassionally I tighten the bed back down in front as it works a little loose. But a loose cover only means that rain can seep in easily. Otherwise it keeps things happy and DRY.
Good price. Reasonable shipping time. Fit is perfect on my 2026 Honda Ridgeline. The online tutorial was spot on. I have ordered from etrailer for years. Everything has always been excellent and this cover is no exception. I highly recommend etrailer.
Do you have a question about this Tonneau Cover?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Daniel
3/17/2022
Great! Just like new.