Will B and W Companion Hitch Head that Fits BWRVK3500 Fit Companion Base for Ford Truck Rail Kit

Question

Question:

Will the head from a BandW companion RVK3500 fit onto the BandW 3305 or the BandW 3300 base.

asked by: John S

1

Helpful Expert Reply:

Yes, the head from a B and W Companion Hitch # BWRVK3500 would fit onto the base part # BWRVB3305 that you referenced. Sounds like you have a 2019 Ford F-350 with the factory rail kit which is exactly what this base is designed to fit.

expert reply by: Jameson C

1

click to enlarge

Answer 1

Hey Robert, so the B and W Companion hitch part #BWRVK3050 would fit the B and W Turnoverball gooseneck you have in your truck bed but it's probably going to be too short in height since it's designed to fit flat bed applications that sit up…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 9

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Hey Ryan! The BulletProof Hitches Aluminum Adjustable 2-Ball Mount #BPH47MR weighs 18 lbs. It has a 6061 T6 grade aluminum construction with a max rise/drop of 6". What kind of trailer are you towing?

view full answer...

Will B and W Companion Hitch Head that Fits BWRVK3500 Fit Companion Base for Ford Truck Rail Kit

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching