Does Reese Rail Kit # RP50084-58 Fit Pro Series Kwik Slide Fifth Wheel Hitch

Question

Question:

Will these brackets and rails allow me to use my Pro series 15,000 reese kwik slide hitch?

asked by: Matt

1

Helpful Expert Reply:

Yes, the rails that come with the Reese Quick-Install Custom Installation Kit # RP50084-58 are exactly what your Reese Kwik Slide Hitch is designed to fit.

expert reply by: Jameson C

1

Answer 1

The Bolts in the center of both rails were originally added to keep the above bed rails from bowing, especially with a slider hitch. The bolts also help with keeping the hitch from moving in the bed and capacity, so it is a very good idea to have…

view full answer...

Answer 2

When moving a fifth wheel rail kit from one truck to another the bolts that attach the brackets to the truck frame can be reused but the bolts that secure the rails to the brackets need to replaced as they are one-time-use. For Curt the replacement…

view full answer...

Answer 3

It sounds like you could have a set of standard fifth wheel rails that most manufacturers use for their fifth wheel hitches to install into. The different manufacturers all make their own brand of rail kit, but they all have basically the same…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Does Reese Rail Kit # RP50084-58 Fit Pro Series Kwik Slide Fifth Wheel Hitch

Continue Researching