Hitch Ball Recommendation that is Made in the USA

Question

Question:

Is the Curt hitch ball made in USA?

asked by: Marc

0

Expert Reply:

We have a USA made solution but it's not the Curt you mentioned. You might be interested in a Convert-A-Ball Interchangeable Ball Set # 904B. This product is made in the USA and comes with an interchangeable hitch ball that will give you the option to easily change between a 2 inch and a 2-5/16 inch ball.

The Curt hitch ball part # A-90 that you referenced is not made in the USA.

expert reply by: Jameson C

0

Answer 1

Hello Greg, thanks for reaching out. Sadly, no, the Step for Curt Adjustable Channel Ball Mounts #C45909 will not work with a Bulletproof Hitch channel ball mount. The Bulletproof channel is 3" wide but the hole spacing would not line up with…

view full answer...

Answer 2

We have 3 different adapters for a B&W Tow & Stow and it all just depends on the size of your hitch receiver: 2" - #BWTS35100B 2-1/2" - #BWTS35200B 3" - #BWTS35300B These have 1-1/8" diameter holes for the clevis pin and…

view full answer...

Answer 3

Hello Mike. The Sway Control 2-Ball Platform for BulletProof Hitches Ball Mount #BPH76RR is made to fit a 3" channel. The 2" hole spacing is also correct, so this ball platform will work well with your Curt Channel Style Adjustable…

view full answer...

Answer 4

Yes! For the correct Clevis hook adapter for the B&W Tow & Stow Pintle Hook with 2" Ball - 2-1/2" Hitches #BWTS20055, that is the Clevis Adapter for B&W Tow & Stow 2-1/2" Ball Mounts #BWTS35200B. Like the Tow &…

view full answer...

Answer 5

The Brophy 2 inch hitch ball #CB26C is made in the USA. It is rated for 7,500 pounds and has a shank length of 2-1/4 inches and shank diameter of 1-1/4 inches. Convert-A-Ball interchangeable ball set #901b has a 2 inch ball as part of the set. It is…

view full answer...

Answer 6

Yes, you can use Clevis Adapter #BWTS35200B with your B&W Adjustable 2-1/2-Inch ball mount #BWTS20040B. The clevis has a 1-1/8-inch hole diameter. This adapter also work with the chrome-finish version of your ball mount, part #BWTS20040C.

view full answer...

Answer 7

Yes the Curt Pintle Hook #C45922 does fit the Bulletproof channels of the adjustable ball mounts like the part #HD256.

view full answer...

Answer 8

Unfortunately, the Clevis Adapter for 2 inch hitch ball mounts, part #BWTS35100B, is only rated for up to 10,000 pounds. The #BWTS35200B you asked about measures approximately 2-3/4 from center on center between the mounting holes and the pins have a…

view full answer...

Answer 9

The distance from the top of the shank to the bottom of the hitch ball at the lowest setting on the Curt Adjustable 2-Ball Channel Mount part #C45927 is 14-3/8". I went out to our warehouse to measure this for you.

view full answer...

Answer 10

Some are, and some aren't. Most of Curt's ball mounts are made in the USA, each individual product description will identify if they were manufactured in the USA. All the Convert-A-Ball ball mounts we offer are manufactured in the USA.…

view full answer...

Answer 11

Either hitch pin hole of the B&W Tow and Stow Ball Mount part #BWTS10049B can be used in the hitch of your vehicle. Whichever one works for your towing application best will be perfectly fine.

view full answer...

Answer 12

Thanks for the picture! The B&W Tow & Stow 3-Ball Mount item #BWTS10049B requires both pins to be inserted in the adjustment slots. Without both pins you won't have enough support for the ball mount to function correctly. It sounds like…

view full answer...

Hitch Ball Recommendation that is Made in the USA

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching