Measurements of B&W Clevis Adapter for Tow and Stow 2-1/2 Inch Ball Mounts

Updated 06/09/2020 | Published 11/28/2016

Products Featured in This Question

Clevis Adapter for B&W Tow & Stow 2-1/2" Ball Mounts - 14,500 lbs

(62)

$76.65

Clevis Adapter for B&W Tow & Stow 2" Ball Mounts - 10,000 lbs

(31)

$64.95

Question:

I would like to know if you have this item in a 2inch receiver that still has the 14,500 rating. Also, what is the size of the connectors and what is the spread of the pin pints. I have an existing hitch with 1inch spacing.

asked by: Morrie A

Expert Reply:

Unfortunately, the Clevis Adapter for 2 inch hitch ball mounts, part # BWTS35100B, is only rated for up to 10,000 pounds.

The # BWTS35200B you asked about measures approximately 2-3/4 from center on center between the mounting holes and the pins have a 1/2 inch diameter and have a usable length of about 4-1/2 inches.

expert reply by: Charles S

Randy M.

6/5/2020

Can the bwts35200b except an adapter plate under the 2 5/16 For a sway bar to pull a camper Of 7500 lbs

Chris R.

6/9/2020

I don't recommend adding a tab and sway bar setup to the Clevis Adapter. This will likely put too much torque on the adapter and may lead to damage down the road.