How Does Prodigy P3 Brake Controller Install on 2006 GMC Sierra

Question

Question:

im new to brake controllers im looking to get the Tekonsha Prodigy P3 for my 2006 gmc sierra 1500 im just wondering if the wires it comes with will match my truck or will I need an adaptor

asked by: Justin

0

Expert Reply:

To install the Prodigy P3 part # 90195 in your 2006 GMC Sierra 1500 requires you to use the install harness part # 3015-P. All you have to do is plug one end of the harness into the back of the controller and the other end into the junction box under the dash and it will be installed and ready to go. I attached an install video for this harness on a similar 2006 GMC Sierra 1500 as yours for you to check out as well to see the entire process.

expert reply by: Jameson C

0

Answer 1

Thank you for providing that information. Leaf springs like the ones you have now typically match the axle capacity on your trailer. Although adding leaf springs with a slightly higher capacity won't hurt, it also is not necessary. Based on the…

view full answer...

Answer 2

For your 2018 Grand Design Imagine 2600RB you will need to measure the axle spacing by finding 2 common points on your axles to measure between. Generally this is done by measuring from center of one axle to the center of the 2nd axle. I never like…

view full answer...

Answer 3

When installing a trailer brake controller in a 2006 GMC Sierra that has a factory 7-way you will both plug in the controller at the under-dash port using the brand-specific wiring adapter AND make some connections under the hood at the power…

view full answer...

Answer 4

Hey David, yes the Prodigy P3 part #90195 uses the same exact install harness as your Primus IQ so it will easily install in place of what you have by simply plugging in. How did you like the Primus?

view full answer...

Answer 5

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6 inch whereas the 225/75-15 fits widths that are 5 inch to 6-1/2 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 6

It looks like the previous owner of the trailer had vehicle tires installed since there are very few trailer tire manufacturers that carry a 235/75R15 size. Even though it might work for a while, trailer tires are always better to use for trailer…

view full answer...

Answer 7

Yes, the Bearing Kit for #84 Spindles part #BK2-100 is correct for a 2018 Grand Design Imagine. This is actually the correct bearing kit for all sub models that use the "120091" 3,500 Lb Axle such as the 2800BH or 2600RB for example. If you…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

How Does Prodigy P3 Brake Controller Install on 2006 GMC Sierra

Featured Help Information

Miscellaneous Media

Continue Researching