Replacement Hub Drum for 7000 lb Dexter Nev-R-Lube Axle
Published 10/27/2018 >
Question:
I have at least two drums that need turning or replacement. I can only find the drums with bearings. I can press my bearings out. What is the drum part # ? thanks
asked by: Steve W
Expert Reply:
You will want the Trailer Hub & Drum Assembly - 7,000 lbs Axles - 8 on 6-1/2 - Nev-R-Lube # 8-385-81SP or # 8-385-82UC3 which also includes the lug nuts and grease cap. Both assemblies include the bearings and there is not a hub that comes without them.
The bearings are not pressed in but rather have a snap ring. I recommend keeping your current bearings as a backup or removing the new bearings to keep until needed.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 7,000-lb Nev-R-Lube Axles - 12" Diameter - 8 on 6-1/2
- Trailer Hubs and Drums
- Hub with Drum
- Standard
- Standard Grade
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: ramp door hinge
- Search Results: tree
- Search Results: trailer equalizer
- Search Results: trailer tie down anchors
- Search Results: d ring
- Search Results: b801ak
- Search Results: d~ring
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV- 2"
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Dexter Trailer Hub and Drum Assembly for 7,000-lb Nev-R-Lube Axles - 12" Diameter - 8 on 6-1/2
- Shop: Tandem Axle Teardrop Trailer Fenders for Enclosed Trailers - 14" to 15" Wheels - Qty 1
- Shop: DeeZee Specialty Series Transfer Tank/Tool Box Combo - Aluminum - 92 Gallon - Silver
- Shop: Equalizer for 2" Wide Slipper Springs - 12" Long - 7/8" Center Hole
- Shop: Floor Mats
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Q&A: Estimated Installation Time for Romik RAL-S Running Boards
- Q&A: Recommended Square Bulldog Jack with 5,000 lb Capacity
- Q&A: Parts Needed to Add Disc Brakes to 2018 Keystone Montana 3121RL
- Q&A: What is Proper Way to Torque Trailer Axle Spindle Nut
- Q&A: Can The Grade 8 5/8" Channel Coupler Bolts Be Replaced With Locking Pins?
- Q&A: Are Radius End And Flat End Slipper Springs For A Trailer Interchangeable?
- Q&A: When to Replace Dexter Nev-R-Lube Bearings
- Article: Trailer Maintenance Schedule
- Article: Flat Towing Package for 2007-2018 JK Jeep Wrangler and Wrangler Unlimited
- Article: Trailer Wiring Diagrams
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Best Vehicles to Flat Tow Behind an RV
- Article: Can You Flat Tow a Ford Escape?
- Article: Slipper Spring Trailer Suspension System Review



