Replacement Bolts for Curt Trailer Hitch # C13105 on 2018 Toyota Sienna

Question

Question:

Just bought the Curt # 13105 hitch for my Sienna from a neighbor but don't have the mounting hardware. What size bolts does it use? Do you offer the hardware kit?

asked by: Michael C

0

Expert Reply:

The Curt Trailer Hitch Receiver # C13105 that you referenced, which is confirmed to fit your 2018 Toyota Sienna, uses six M12-1.25 x 40 hex bolts and six 1/2 inch conical toothed washers for installation. We can indeed provide you with this hardware kit with part # RHK. Once on the product page simply select "Curt" in the dropdown menu and type in "C13105" in the part number text box. We will then send out all the needed installation hardware for this hitch on your vehicle.

I have attached an installation video and the written instructions that you can also use for reference.

expert reply by: Chris R

0

Walter

5/18/2020

PLEASE what is the size for the hitch installation in my sienna Toyota 2011, I. Red the screws and the 2 nuts , could you tell me the right size and if you have the set the price, thanks

Chris R.

5/21/2020

If you have the same Curt # C13105 mentioned above (which is a fit for your 2011 Sienna as well), the bolt and washer size is the same. You can obtain a full replacement set using the Hardware Kit # RHK. Pricing is listed on the product page. If you have a different hitch model just let me know.

Walter

5/21/2020

Do you send the kit wrong I need the screws and waste for install the sienna. 2011 hitch, this need 3 screws for each side and washers normal and pressure ones for each screws, total of 6 degrees and 6 nut wash normal and 6 pressure washer, the code you did send me is 4 screws only and very short .thanks ease let me know if do you have this kit to install my tow bar hitch in my sienna 2011 thank s again.

Chris R.

5/24/2020

The picture on the # RHK product page is just a sample image - it's not actually what the kit for the Curt hitch on your Sienna consists of. We use this part number for the replacement hardware kit of every hitch we have available - but as soon as you type in the hitch model number (C13105) inside the text box provided and select "Curt" in the manufacturer drop-down menu, we will send you out the exact kit for this hitch on your vehicle.

Answer 1

We have just what you need. If you type RHK in the search box on our website it will take you to the replacement hardware kit product page. You will then simply type the number of the hitch you need hardware for in the box that is labeled Hitch Item…

view full answer...

Answer 2

For your 2009 Toyota Sienna, I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C13105 you referenced. From the lowest point of the hitch receiver you will have about 8-1/2 inches of ground clearance. The inside top of…

view full answer...

Answer 3

Thanks for reaching out. The JR Products RV LP Gas Manifold #JR45CR is designed for use with low pressure, regulated propane only. It is not rated to handle high pressure propane coming directly from a tank. Propane tanks, including 5 lb cylinders,…

view full answer...

Answer 4

This is a great question and I can definitely understand being a bit overwhelmed trying to work through all the available hitch options for your vehicle. Just to cut right to it I specifically recommend the Curt Class III Trailer Hitch #C13343 for…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

The main differentiation between the available Class III hitches is how they'll appear once installed. The etrailer brand #e98837 and the Draw-Tite #75237 will have the entire hitch visible under the rear bumper. In contrast, the Draw-Tite #76112…

view full answer...

Answer 7

We can get you everything you need for towing with your 2017 Toyota Sienna XLE. By plastic shield, I believe you are referring to the appearance panel underneath the Sienna, and that will have to trimmed a bit in each of the hitches available for the…

view full answer...

Answer 8

The Thule Passage 2 Bike Carrier - Trunk Mount #TH910XT is indeed a fit for your 2018 Buick Encore. Now, trunk bike racks are typically not suitable for electric bikes due to the excess weight that electric bikes have. It looks like your Aventon Pace…

view full answer...

Answer 9

The Curt #C22UR and the etrailer #e56RR are identical with the exception of the finish. The Curt hitch has a glossy finish while the etrailer hitch has a matte black finish. I prefer the matte black since it helps hide inevitable dirt and dings on…

view full answer...