How Does Air Line Connect to Elbow and Tee Fittings

Question

Question:

What do i need to secure airline to the T and the L Please help Thanks.

asked by: Homer H

0

Expert Reply:

I went out to the warehouse to confirm and the 1/4" air line in the Air Line Service Kit for Firestone Ride-Rite/Sport-Rite Air Helper Springs # F2012 will fit directly into the tee and elbow fittings that come with the kit. You do need to ensure you push line enough so that it "catches" in the fittings.

expert reply by: Kyle S

0

click to enlarge

Answer 1

Yes, all of the Firestone Ride Rite air suspension systems use 1/4 inch tubing and 1/4 inch NPT fittings like the #F2012 that you referenced. This kit includes 18' of red 1/4" air line, (2) 1/4" NPT (National Pipe Thread) elbow…

view full answer...

Answer 2

First you will want to completely deflate the airbags. Then to remove the air line from a push to connect fitting like part #F3128-1 you first push the outer metal ring inward and then pull the air line out. You may also need to push in on the air…

view full answer...

Answer 3

It looks like you have the Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle #F2445 for your 2017 Toyota Tundra. The correct elbow connector is the Firestone Elbow Connector for 1/4" Tubing, 1/4 NPT - Male #F3031-1. Make…

view full answer...

Answer 4

Yes the Firestone Ride Rite kit part #F2299 does include bolts that are M10-1.5 like the part #F2135823293 that you referenced.

view full answer...

Answer 5

We do not have a complete kit of all installation parts for Firestone Ride-Rite Air Helper Springs #F2550, minus just the springs. We recommend using an entire new air bag kit since the combined cost of all the individual parts you'd need will be…

view full answer...

Answer 6

We do carry the replacement parts you need for the Firestone Ride-Rite Air Helper Springs #F2550 on your 2000 Ford F-250. - Replacement Bail Clamp for Firestone Ride-Rite Air Helper Springs #F3077 - Replacement Heat Shield for Firestone Ride-Rite Air…

view full answer...

Answer 7

The correct replacement remote for the Wireless AIR 72000 that you referenced is the #AL73002 that you referenced.

view full answer...

Answer 8

The Firestone Ride-Rite Air Helper Springs kit that will work with your 2010 F350 4 wheel drive is #F2550. This kit includes two of the A01-760-6401 air springs. You will not be able to use the A01-760-6781. The full kit includes the brackets,…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

How Does Air Line Connect to Elbow and Tee Fittings

Product Page this Question was Asked From

Continue Researching