Replacement Hardware and Parts for Firestone Ride Rite Helper Springs 2550 on 2000 Ford F-250

Question

Question:

I have an older Firestone Ride Rite kit installed on my 2000 Ford F-250 SD. I believe its rear kit 2550. The Lower bracket is stamped 5380. I dont need a new kit just looking for certain replacement parts including the bail clamps, heat shield, bolt/hardware kit and air fittings. Can you identify the parts and do you sell them separately from a whole kit?

asked by: Wayne R

0

Expert Reply:

We do carry the replacement parts you need for the Firestone Ride-Rite Air Helper Springs # F2550 on your 2000 Ford F-250.

- Replacement Bail Clamp for Firestone Ride-Rite Air Helper Springs # F3077

- Replacement Heat Shield for Firestone Ride-Rite Air Helper Springs # F2135821004

- Replacement Hardware Kit for Firestone Ride-Rite Air Helper Springs F2550 # FA21-760-2550

The hardware kit does include the air fittings you need as well.

expert reply by: Kyle S

0

Answer 1

The Firestone Ride-Rite Air Helper Springs kit that will work with your 2010 F350 4 wheel drive is #F2550. This kit includes two of the A01-760-6401 air springs. You will not be able to use the A01-760-6781. The full kit includes the brackets,…

view full answer...

Answer 2

I went out to the warehouse to confirm and the 1/4" air line in the Air Line Service Kit for Firestone Ride-Rite/Sport-Rite Air Helper Springs #F2012 will fit directly into the tee and elbow fittings that come with the kit. You do need to ensure…

view full answer...

Answer 3

We do not have a complete kit of all installation parts for Firestone Ride-Rite Air Helper Springs #F2550, minus just the springs. We recommend using an entire new air bag kit since the combined cost of all the individual parts you'd need will be…

view full answer...

Answer 4

The correct replacement remote for the Wireless AIR 72000 that you referenced is the #AL73002 that you referenced.

view full answer...

Answer 5

For the U-bolt part #F3373 the dimensions are: The outer width is 6-3/4" and the inner width is 6" The outer length is 4-3/4" and the inner length is 4-3/8" The length of the threaded portion is about 2 inches

view full answer...

Answer 6

Getting the correct spacers depends on what the distance between the upper and lower mounting brackets is. If the distance is 9-1/2" to 10-1/2" then you'll want to use #F2370 . If the distance is 8-1/2" to 9-1/2" then…

view full answer...

Answer 7

The correct bail clamp/u-bolt you need for your Firestone air bag kit on your 2004 Ford F-350 is the part #F3077 because the Firestone kit you have installed on your truck is the part #F2550. We have confirmed this with Firestone.

view full answer...

Answer 8

I do have the mounting brackets you will want for your 2003 GMC Sierra 2500HD but you will want to have the Air Spring for Firestone Ride-Rite Kit part #F6781 in order for them to work for you as not all Firestone airbags are the same across kits. If…

view full answer...

Answer 9

Are you sure you have the 2400? The #F2400 is designed to fit the 2005-2007 models of the F-350. The correct kit for the 1999 is the #F2550 which uses the Replacement Bail Clamp #F3077. If you're sure it is the 2400 we do not carry the bail clamp…

view full answer...

Answer 10

We do have the exact parts you need for your Firestone Ride-Rite Air Helper Springs #F2350. The correct clamp is the Replacement Bail Clamp for Firestone Ride-Rite Air Helper Springs #F3077, and the bolts will be with the Replacement Hardware for…

view full answer...

Answer 11

I spoke with Firestone about this and the brackets of the #F2597 are a little different design but their capacity is still the same. Their recommendation was to go with the new kit because of the better design. If you decide to replace the brackets…

view full answer...