Will the MaxxAir II Vent Cover # MA86JR Fit the MaxxFan Plus Roof Vent # MA00-04500K

Question

Question:

will this fit the 4500K? the dimensions dont really match.

asked by: Chris

0

Expert Reply:

Yes, the MaxxAir II RV and Enclosed Trailer Roof Vent Cover # MA86JR will fit the MaxxFan Plus Roof Vent # MA00-04500K.

The reason that the vent cover is so much larger is that it is more of a universal style. If you would like a more custom fit then you need the MaxxAir FanMate Rain Cover # MA00-955002.

expert reply by: Jon G

0

Answer 1

Yes, to run the Hot-Line LED Third Brake Trailer Light Bar w/ Reflector #328-003-6017X as a brake light only you will need the 3rd Brake Light Logic Module #PP20-702. This module will take input from both tail lights to determine when the brake light…

view full answer...

Answer 2

Hey Jon! You'll have to take the Global Link Versa Pro Mini RV Baggage Door Latch item #GL25VR to a locksmith that has a Global Link master key. We can not change those here and ours comes keyed to G391.

view full answer...

Answer 3

Yes, the MaxxAir Standard RV and Trailer Roof Vent Cover #MA00-933069 is compatible with the MaxxFan Roof Vent w/ 12V Fan #MA00A04301K. If your model roof vent was built recently enough to the clips holder built into the mounting flange then…

view full answer...

Answer 4

If you're wanting to replace just the cover/lid that lifts on your MaxxAir MaxxFan then you'll want the MaxxAir UniMaxx Universal Replacement Lid for RV and Trailer Roof Vent - Translucent Smoke #MA00-335002 or #MA00-335001 for white. If…

view full answer...

Answer 5

I've attached the owners manual for your 4900K model which is similar to the #MA00-04500K model. It sounds like your operator mechanism is bad according to my tech contact at MaxxAir. For your 4900K model you will want the Replacement Operator…

view full answer...

Answer 6

The type of roof vent cover you need to attach to the vent cover brackets of your Maxxair 4951KS like part #MA00-04500K is the part #MA00-955003 which attaches to the brackets on the base of the vent with included cotter pins.

view full answer...

Answer 7

Actually the type of roof vent cover you need to attach to the vent cover brackets of your Maxxair 4951KS like part #MA00-04500K is the part #MA00-955003 which uses those brackets with the included cotter pins of the cover.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Will the MaxxAir II Vent Cover # MA86JR Fit the MaxxFan Plus Roof Vent # MA00-04500K

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching