Is The MaxxAir Standard Roof Vent Cover Compatible With The MaxxFan Roof Vent

Updated 06/26/2023 | Published 06/25/2023

Products Featured in This Question

MaxxAir Standard RV and Trailer Roof Vent Cover - 20" x 19" x 9-1/2" - Black

(614)

$39.85

MaxxFan Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - White

(248)

$184.65

MaxxAir II RV and Trailer Roof Vent Cover w/ EZClip - Black

(694)

$45.38

Question:

Hello! I would like to know if the following items are compatible: MA 00A04301K MaxxAir vent fan MA 00-933069 MaxxAir standard RV and Trailer Roof Vent Thanks!

asked by: Sonja M

Helpful Expert Reply:

Yes, the MaxxAir Standard RV and Trailer Roof Vent Cover # MA00-933069 is compatible with the MaxxFan Roof Vent w/ 12V Fan # MA00A04301K. If your model roof vent was built recently enough to the clips holder built into the mounting flange then you'll want the MaxxAir II RV and Trailer Roof Vent Cover w/ EZClip - Black # MA86JR instead to make installation as easy as popping in four clips.

If not, then the # MA00-933069 also comes with mounting brackets that will bolt to the sides of the vent. If this is the installation method that you have to go with then I recommend checking out the installation video below where Shane will walk you through the process.

I do want to note that the manufacturers do not make any of these covers tall enough to fully open the lid of the vent but each have stated that the vent opens enough that there wouldn't be a performance drop. Since yours is manual lift you'll just want to be careful that you're not over extending the lid and putting pressure on from the cover because you can end up breaking the lift arm and have to replace it.

expert reply by: Kevin C