Recommended Torflex Axle Lift Kit for 2015 Lance 1575

Question

Question:

Have a 2015 Lance 1575 that I need to lift a bit as our Jeep and Truck are much taller than the minivans it was designed to be towed behind. It has the Dexter torsion axle. Ive read elsewhere that in order to lift, Ill need to upgrade the axle, but found a lift kit here for single axle Dexter applications... Can someone please clarify? Thanks!

asked by: AJ

0

Expert Reply:

Dexter recently added lift kits for their Torflex Axles because many vehicles have continued to get taller and in order for trailers to be compatible they started offering these kits. Based on my research it appears you have the Dexter #10 Torflex axles on your trailer which means you will want lift kit # K71-707-01. These axles have bolts that are 8 inches center to center. If you have bolts that are 7-3/4 inches on center, then you have #9 Torflex axles and instead want # K71-723-01. These spacers lift your axle 2-5/8 inches

expert reply by: Jason S

0

Answer 1

Hi Jeremy, To determine the correct lift kit for your R-Pod 177 you'll need to determine what axle you have. There should be a sticker on the axle that lists the serial number and some other info on it that we can use to figure out what it is.

view full answer...

Answer 2

For single Torflex axle trailers like what your Lance has we have 2 different lift kits, part #K71-723-01 for #9 Torflex axles and part #K71-707-01 for #10 Torflex axles. From what I could find on your 2015 Lance 1575 it looks like you have a #10…

view full answer...

Answer 3

Sounds like you have a Dexter Torflex axle on your 2015 Lance 1575 and you are looking for the correct lift kit for it. You'll need to check out the axle to determine which exact one you have. Lift #K71-707-01 is for #10 Torflex axles with 2,300…

view full answer...

Answer 4

We offer four different axle lift kits for the Dexter Torflex axles. The difference between these kits is based on the weight capacity of the axle or tandem axles. There will be a tag on the axle shaft that will have the information needed to…

view full answer...

Answer 5

For your single axle Lance 1475 travel trailer you will use either Torsion Lift Kit #K71-723-01 or kit #K71-707-01 depending on which Torflex axle you have. You can check the identification sticker on the axle beam to find the axle number. If you…

view full answer...

Answer 6

A #9 Torflex axle is rated for 1,000 - 2,200 lbs so since your Lance 1575 weighs well over 2,200 lbs dry I'm confident you have a #10 Torflex axle (which can be rated for 2,300 - 4,000 lbs). With that in mind, since you have a single axle trailer…

view full answer...

Answer 7

It isn't any fun hearing that, is it? If your 2017 Lance 1575 has Dexter #9 Torflex axles with a 2,000-lb capacity, the Dexter #K71-723-01 lift kit would be the correct lift kit. If you have the #10 Torlflex axle, you'd need #K71-707-01. Keep…

view full answer...

Answer 8

Hey Bill, thanks for reaching out! It sounds like you're needing something like the Scissor Stabilizer Jacks w/ Handle #TJSCHD-24. This has a few different holes for the mounting hardware so it should be able to match up with the bolt pattern you…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Recommended Torflex Axle Lift Kit for 2015 Lance 1575

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching