Will EAZ Lift Fifth Wheel Hitch Fit in Rail Adapter part # DM6194

Question

Question:

I have a Ez-Lift 18k 5th wheel slider hitch by Camco, can you tell me if this will fit?

asked by: Doug M

1

Helpful Expert Reply:

Your Eaz-Lift 18k 5th wheel slider hitch by Camco is designed to fit industry standard fifth wheel rails like what the Demco Rail Adapter part # DM6194 provides so this would work well for you.

expert reply by: Jameson C

1

Answer 1

The B&W Patriot 5th Wheel Trailer Hitch #BWRVK3255 fits industry-standard fifth wheel rails so to mount it to a 2019 Ford F-350 with the OEM puck system all you need is the Reese Elite Series Underbed Rail Adapter for Standard 5th Wheel Trailer…

view full answer...

Answer 2

The EAZ Lift gooseneck adapters are rated for 30,000 pounds gross trailer weight so that 7,500 pounds must be the pin weight capacity. The adapter takes a 2-5/16 inch ball so a 3 inch ball would not fit in it. The ball cavity of the adapter has to be…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 10

Hello Femi, Thanks for reaching out! Both the Demco Autoslide #DM39SV and #DM29GV are excellent choices for your 2026 GMC Sierra 3500 with the factory prep package, and both are compatible with your Grand Design Reflection 150 Series. The biggest…

view full answer...

Answer 11

Hey Adam, we have just what you are looking for with the B and W fifth wheel rail kit part #BWRVK2402 which is a confirmed fit for your 2017 Ford F-250 and is the industry standard rail design which means it will fit the hitch you have. This is a…

view full answer...

Answer 12

Hey Tom, congrats on the new truck! Typically when we hear that someone has the OEM tow prep package they mean the puck system. This is going to be five circular holes built into the bed of your Ram truck and is by far the best way to attach a 5th…

view full answer...

Will EAZ Lift Fifth Wheel Hitch Fit in Rail Adapter part # DM6194

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching